Forum: General Discussion
If you need extended support, contact our Support Team.
Forum Guidelines (*) The moderators hold the rights to move or modify posts in order to keep the discussions clear or to facilitate the search.
Reloop Touch not...
Tema: Reloop Touch not working - Page: 1
just got my Reloop Touch today and the touchscreen is not working , sometimes it reacts but most of the time not correct . Seems like I got myself a piece of **** , anyone had the same problem ?
Mensajes Wed 14 Feb 18 @ 11:40 pm
See 1st chapter of this page https://www.virtualdj.com/manuals/hardware/reloop/touch/display/displayadvanced.html
Once you do this once, the setting should be remembered next time u connect the Touch.
Mensajes Thu 15 Feb 18 @ 12:11 am
Mensajes Thu 15 Feb 18 @ 3:12 am
now i cant get the master-volume to work , what can i do about that ? And is it true that each Reloop Touch has its own satellite ?
Mensajes Thu 15 Feb 18 @ 11:36 pm
Mensajes Fri 16 Feb 18 @ 7:53 am
In case you have not connected speakers to the TOuch and its sound card is not used in the Audio Setup, then the Master Volume knob of the Touch will not do anything.
Mensajes Fri 16 Feb 18 @ 9:40 am
I tried different soundcard-settings but it makes no difference . Also my windows 10 screen is completely altered since I calibrated the touchscreen . Maybe its a good idea to have the touchscreen calibrated automaticly when connected and to integrate ithe calibration in the software . You cant have these problems with a simple installation of hardware .
Mensajes Fri 16 Feb 18 @ 12:06 pm
Master .. Reloop Touch ... chans 1,2
Headphones .. Reloop Touch .. chans 3,4
If you have speakers connected at the rear panel of the Reloop Touch, the Master Volume knob on the actual controller should alter tha output level on speakers. Isnt that the case for you ??
What do u mean by "my windows 10 screen is completely altered " ? Is it a different on resolution now, or is that also a touchscreen and has now a different calibration ?
Mensajes Fri 16 Feb 18 @ 1:20 pm
Mensajes Fri 16 Feb 18 @ 7:27 pm
Just make sure all of your Displays are set to "Extended" (extend your Desktop) with your primary to 1
Mensajes Sat 17 Feb 18 @ 4:52 am
Mensajes Sat 17 Feb 18 @ 7:13 am
Mensajes Sun 18 Feb 18 @ 3:08 am
Mensajes Sun 18 Feb 18 @ 4:42 am
OTOH what computers do always have is graphics cards and video outputs.
Mensajes Sun 18 Feb 18 @ 9:38 am
Mensajes Sun 18 Feb 18 @ 12:34 pm
Mensajes Sun 18 Feb 18 @ 12:37 pm
OceanBob wrote :
I suggest Reloop makes a video-output on the controller , way easier than configurating a computer .
you might want to do that at the hardware makers forum -> https://support.reloop.com/
Mensajes Sun 18 Feb 18 @ 12:38 pm
Mensajes Mon 19 Feb 18 @ 1:34 pm
OceanBob wrote :
Now I cant get the On Screen Keyboard to work on the Touch-display . In the manual it says you have to grab the keyboard from the primary screen and place it at the Display Touch , but how do you do that ? I havent got a clue.
I do it like this (with the laptop trackpad):
Mensajes Mon 19 Feb 18 @ 2:06 pm
Mensajes Mon 19 Feb 18 @ 2:54 pm