Connect the unit’s USB socket with a USB port of your computer using the provided cable. Connect a pair of amplified speakers or amplifier to the RCA Master Output at the right side panel and a pair of headphones to the right side panel of the Reloop Ready.
Put the left-side Source iOS/PC switcher
to the PC
: Install the required
Reloop ASIO Windows driver from https://www.reloop.com/reloop-readyMac
: No driver is required to be installed.
VirtualDJ SetupDownload and install VirtualDJ from http://www.virtualdj.com/download/index.html (in case you have not done already)
Once VirtualDJ is launched, a Connect Window will appear. Login with your virtualdj.com account’s credentials.
A Pro Infinity, a PLUS or a Pro Subscription License is required to use the Reloop Ready. Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ.
A detection window will appear next, asking to use or not the pre-defined audio setup with the built-in sound card of the Reloop Ready.
Select “Ready” and click OK
The unit is now ready
to operate with VirtualDJ.
The unit should be visible in the MAPPING tab of Config and the “factory default” available/selected from the Mappings drop-down list.
The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions.
Find more details at http://www.virtualdj.com/wiki/VDJ8script.html
The unit has a pre-defined Audio setup and a special button in the AUDIO tab of Config to provide that.
For further software settings please refer to the User Guide of VirtualDJ. http://www.virtualdj.com/manuals/virtualdj8/index.html
The Reloop Ready offers 8 main and 1 secondary Modes for the Pads.
To select one of the 8 main modes
, hold down the MODE
button  and then press one of the 8 Pads
While the MODE button is pressed, the Pads section in default VirtualDJ GUI will display the available preset pages.
Use the PARAMETER
buttons  to adjust the 1st Parameter
of the selected Pads mode. Hold SHIFT
down and then use the PARAMETER buttons  to adjust the 2nd Parameter
of the selected Pads mode (if available) Reloop Modes Page
By default the 8 Main Pad modes are assigned to Hotcues
, Manual Loop
, Loop Roll
, but can be assigned to a different Page. See https://www.virtualdj.com/manuals/virtualdj/interface/decks/decksadvanced/pads.html#controller
mode for Pads can be selected when holding SHIFT
and pressing the MODE
button. This mode has been assigned by default to the Touch FX Page
The Touch FX
mode assigns Pads to a special Pads page (only available when the Reloop Ready is connected) and can apply pre-defined Effects to the Left/Right Decks. The Pads trigger the Effect temporary if pressed for more than 1 second, or toggle (on/off) if shortly pressed. The pre-defined Effects can be changed by editing the Touch FX Pads page. Touch FX Pads Page
For further Technical features and specifications, visit Reloop READY
Hardware Integration Department 2021 - ATOMIX PRODUCTIONS Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.