DJ VinylTouch
I've noticed that when I try to save a track cleaner edit, with mute vocals used as the censorship, that the resulting edit has the vocal not muted 100% (some of it slips through if the region start was close enough to what you wanted to mute, almost like a delayed attack on the vocal or the result using stems 1.0).
I did verify that before I saved the file, the vocal muting (in the editor itself) was done properly via the playback. I also verified, using the original file, that if I used stems 2.0 to remove the vocals live in said spots, that the vocal elimination is pretty much (almost) perfect.
Version used: v2024-m b8350
I did verify that before I saved the file, the vocal muting (in the editor itself) was done properly via the playback. I also verified, using the original file, that if I used stems 2.0 to remove the vocals live in said spots, that the vocal elimination is pretty much (almost) perfect.
Version used: v2024-m b8350
Mensajes Wed 06 Nov 24 @ 12:23 pm
interceptintercept
Is the issue also present when exporting the track and playing outside VDJ?
Mensajes Wed 06 Nov 24 @ 7:32 pm
DJ VinylTouch
I've not tried an actual permanent export of the result - this is just using the resulting vdjedit file (I'll try the former later).
Mensajes Wed 06 Nov 24 @ 7:51 pm
PANOSV
DJ VinylTouch wrote :
I've not tried an actual permanent export of the result - this is just using the resulting vdjedit file (I'll try the former later).
i had similar issues myself... actually the vdj edit file is not a real file with the stem removed... but a hybrid file that removes the stems realtime in the portion that is defined within the editor.. thats why i export a new
mp3 file with the vocals muted... although there are sometimes that the result does not satisfies me and i think that something is "wrong" i haven't done the exact test that you made yourself and maybe is a good opportunity to do so.
Mensajes Wed 06 Nov 24 @ 9:08 pm
PANOSV
also PLEASE make the cues visible in the track cleaner editor.. its way easier to work with
Mensajes Wed 06 Nov 24 @ 9:09 pm
DJ VinylTouch
PANOSV wrote :
i had similar issues myself... actually the vdj edit file is not a real file with the stem removed... but a hybrid file that removes the stems realtime in the portion that is defined within the editor
So I already knew this, that's why I suspect it's fixable without redoing the track cleaning work. I (personally) don't need a whole new replica of the track for djing purposes - to me that is a waste of space. However, if I plan to do DAW work or other work outside of VDJ with it, then I'd export it to a new file (starting with lossless to keep the end quality as high as possible).
Mensajes Wed 06 Nov 24 @ 9:24 pm
Adion
Any of the stems settings are set to reduced quality?
Mensajes Thu 07 Nov 24 @ 4:29 am
DJ VinylTouch
I've just checked stems settings (haven't looked at those in a while) and i've noticed the following:
stemsRealtimeSeparation is set to Always. Could the other two be the cause? If so, why is it the live muting (during playback and from the track cleaner editor) works as expected?
- stemsBleedMuteVocal = 80%
- stemsBleedMuteInstru = 30%
stemsRealtimeSeparation is set to Always. Could the other two be the cause? If so, why is it the live muting (during playback and from the track cleaner editor) works as expected?
Mensajes Thu 07 Nov 24 @ 4:37 am
Adion
No, the stemBleed settings are only used for reduced quality.
When set to always it should use stems 2.0 for the track cleaner as well
When set to always it should use stems 2.0 for the track cleaner as well
Mensajes Thu 07 Nov 24 @ 4:43 am
DJ VinylTouch
Just wanted to bring attention to this again. I just finished and saved a track cleaner edit with mute vocals, and the playback essentially ignored the mute half of the time.
Was anyone else able to confirm this?
I'm using v2024-m b8350
Was anyone else able to confirm this?
I'm using v2024-m b8350
Mensajes Fri 22 Nov 24 @ 4:08 am