Charlie Wilson
Gain volumes on the mc6000mk2 are plus 20%, I need max gain volume to be plus 10%.
Mensajes Sat 20 Feb 16 @ 9:45 pm
groovindj
Where are you getting this from? As I said, the mapping doesn't contain anything that boosts the gain by 20% (which is what you seem to be saying).
Mensajes Sat 20 Feb 16 @ 10:06 pm
Charlie Wilson
The mixers gains are plus 20% it says on the mixer face it's self,
Mensajes Sat 20 Feb 16 @ 10:13 pm
groovindj
Ah right, now I get you!
That's not a percentage, it's dB. Plus, the mixer on the mk2 is not really a mixer - it's a controller for the VDJ software mixer. The software mixer simply responds to the mapping command of 'gain'.
Regardless of what's written on the unit, the software is just controlling the gain the same way it would from any MIDI controller set to control 'gain'.
That's not a percentage, it's dB. Plus, the mixer on the mk2 is not really a mixer - it's a controller for the VDJ software mixer. The software mixer simply responds to the mapping command of 'gain'.
Regardless of what's written on the unit, the software is just controlling the gain the same way it would from any MIDI controller set to control 'gain'.
Mensajes Sat 20 Feb 16 @ 10:50 pm
Charlie Wilson
I think this mixer has a preamp in it and the gains adjust that as well as the software gains and given the fact that the mixers gain is plus 20 % thats why I have so much gain/headroom!
Mensajes Sat 20 Feb 16 @ 10:58 pm
groovindj
It's not a percentage!
+20 is the amount of decibels that the gain control (on a hardware mixer) would be capable of adding to the signal.
However, the mk2 gain controls simply send a MIDI signal (from 0 to 127) to VDJ.
The VDJ software mixer gain control only has a 12dB boost - I just checked on my PC here, by turning the s/w mixer gain up. The figure given when hovering over the gain knob is +12dB. So when you turn the controller gain knob up, the highest VDJ can increase the signal is 12dB.
However, I am willing to be proven wrong by VDJ staff if they know more than I do :-)
+20 is the amount of decibels that the gain control (on a hardware mixer) would be capable of adding to the signal.
However, the mk2 gain controls simply send a MIDI signal (from 0 to 127) to VDJ.
The VDJ software mixer gain control only has a 12dB boost - I just checked on my PC here, by turning the s/w mixer gain up. The figure given when hovering over the gain knob is +12dB. So when you turn the controller gain knob up, the highest VDJ can increase the signal is 12dB.
However, I am willing to be proven wrong by VDJ staff if they know more than I do :-)
Mensajes Sat 20 Feb 16 @ 11:06 pm
Charlie Wilson
ok, i need this to be plus 6db.
How do i do this?
How do i do this?
Mensajes Sat 20 Feb 16 @ 11:08 pm
Charlie Wilson
in fact, i need this to be less than 0db at top dead centre (12 o'clock) -8.45db at 12 o'clock would be great
Mensajes Sat 20 Feb 16 @ 11:13 pm
groovindj
0dB at the centre position is the VDJ norm. It makes sense because it gives you an even amount of boost or cut.
You can lower the overall output level by changing the zerodB setting in config. Most people set it to -6dB.
You can lower the overall output level by changing the zerodB setting in config. Most people set it to -6dB.
Mensajes Sat 20 Feb 16 @ 11:25 pm
Charlie Wilson
-6db at top dead centre (12 o'clock) would be great but the only setting I see for the gain knobs is "gain" no levels as such?
Mensajes Sat 20 Feb 16 @ 11:39 pm
groovindj
Setting a lower zerodb level won't change the "0dB in the centre" setting of the gain controls. What it does is provide more headroom for the software mixer.
The default setting doesn't allow any headroom, so when the tracks are at 0dB they're at the maximum level that VDJ can output - meaning that any use of EQ boost or mixing track together will push the output past max and trigger the limiter. Most users would agree that you don't want that!
Setting zerodb to -6 gives the tracks a "breathing space" of six decibels so you could (for example) add 6dB of bass without triggering the limiter.
The default setting doesn't allow any headroom, so when the tracks are at 0dB they're at the maximum level that VDJ can output - meaning that any use of EQ boost or mixing track together will push the output past max and trigger the limiter. Most users would agree that you don't want that!
Setting zerodb to -6 gives the tracks a "breathing space" of six decibels so you could (for example) add 6dB of bass without triggering the limiter.
Mensajes Sat 20 Feb 16 @ 11:47 pm
Charlie Wilson
I would like to experiment with this, how would I go about setting to -6db?
Mensajes Mon 22 Feb 16 @ 8:22 pm
kradcliffe
Search for ZeroDB in settings and change it there.
You need to also have autoGain set to auto, not auto+remember for it to work.
I tried it but the gain went all weird on me with the controller. Not had a chance to play about with it properly.
You need to also have autoGain set to auto, not auto+remember for it to work.
I tried it but the gain went all weird on me with the controller. Not had a chance to play about with it properly.
Mensajes Mon 22 Feb 16 @ 8:44 pm
Charlie Wilson
Thanks Keith,
I have done this now and will report back with findings.
I have done this now and will report back with findings.
Mensajes Wed 24 Feb 16 @ 5:52 pm
BluegalaxyDJ
kradcliffe wrote :
I use booth out all the time and have had no issues at all.
Keith
Keith
Hey guys, this bowling alley wants me to just bring my mixer and laptop, do i just go out of the 1/4 in jacks for the booth send into there system and thats it? or do i need to change something on settings? Thanks!
Mensajes Wed 15 Jun 16 @ 2:34 am
kradcliffe
No, booth out is a hardware control. Just make sure the selector at the bottom is set to master (furthest setting on the right) and you press the "post" button to use the mic on the booth out.
Mensajes Wed 15 Jun 16 @ 7:28 am