djpuurs
I have connected my mixer to my MK2 and my turntable to my Mk2 as well. But when I want to use my mixer(Stanton M201), it doesn't work. Any suggestions?Grtz
Mensajes Sat 01 Jul 06 @ 5:12 pm
Rune (DJ-In-Norway)
connected your mixer to the mk2?
This is what you need to do:
- Connect your turntables to the phono in at MK2.
- Connect the outs (output 1/2 and output 3/4) to your stanton mixer.
Set it up right in VDJ soundcard settings and Hercules control pannel.
You did not say if you use timecode vinyls or real vinyl (for bypass with hercules).
But both are possible, depending on settings in VDJ and Hercules control panel.
In Hercules, you need to make sure it "listens" to line-in, so press the icon next to the volum sliders in the Hercules pannel, to open up for line-in signal
Hope that helps
This is what you need to do:
- Connect your turntables to the phono in at MK2.
- Connect the outs (output 1/2 and output 3/4) to your stanton mixer.
Set it up right in VDJ soundcard settings and Hercules control pannel.
You did not say if you use timecode vinyls or real vinyl (for bypass with hercules).
But both are possible, depending on settings in VDJ and Hercules control panel.
In Hercules, you need to make sure it "listens" to line-in, so press the icon next to the volum sliders in the Hercules pannel, to open up for line-in signal
Hope that helps
Mensajes Sat 01 Jul 06 @ 5:19 pm
djpuurs
This was my connection:MK2: 1/2 output to soundboxes and 3/4 Output to my mixer. From my turntable their goes a cable to the Mk2 in Input 1/2.The 3/4 output from my Mk2 wich goes to my mixer is located in L1, is this correct?
Thank you very much. I use both TCV and real Vinyl's, but I use the bypass on the Mk2 and that works good :).
Thank you very much. I use both TCV and real Vinyl's, but I use the bypass on the Mk2 and that works good :).
Mensajes Sat 01 Jul 06 @ 5:25 pm
Timmyg1978
Connect output 1/2 to input 1 of your mixer and output 3/4 to input 2 of your mixer. Set cue on the mk2 to channel 3/4 and slide the crossfader of the mk2 all the way left to channel 1/2 (outputs 1/2 are main while outputs 3/4 are cue) and you're ready to go;^]
Mensajes Sat 01 Jul 06 @ 7:27 pm