VirtualDJ - BUILD 2048

PRO InfinityCEOMember since 1996

-Fix some OS X 10.10 issues
-Fix HID color output
-Improve HID digit output
-Fix beatphase detection bug
-Fix VST plugin parameters not remembered
-sampler_mode action can work on individual samples
-sampler_loop can toggle loop on/off
-Fix activating slicer or loop roll can cause drop-out for a short time
-Fix slicer sometimes not turning on or off
-Fix slicer when used inside loop
-fix sampler_mode for specific samples
-"None" option added for videoAudioOnlyVisualisation
-Small looproll fix
-fader start doesn't trigger loading of a new song
-slicer "step" fix
-effect_select_multi "video" +1 fixed
-fix loop roll position marker sometimes not disappearing
-slicer x "pressed" action to check difference between active slice and highlighted slice
-fix beatlock unable to pause/stop deck
-fix possible glitch when slicer button released
-fix possible crash when reading corrupt id3 tag
-Fix crash with some djc actions
-Fix visual type='color' on mac
-Filter folders using 'top' are automatically sorted now
-Reverb effect parameters shown as starting from 0 instead of from center

Mensajes Sun 16 Nov 14 @ 7:45 am

groovindj

PRO InfinityMember since 2007

sclavel wrote :

-sampler_loop can toggle loop on/off

OK, confirmed that using sampler_loop 1 switches sample 1 between loop and drop.

However, this can only be seen when using the sampler list view (where the mode heading can be displayed).

Can we please have a way of displaying loop/drop status somewhere? Either on the pads or elsewhere on a skin by using a get command perhaps?

When in list mode, we can change volume and length by clicking those areas. We also need ability change between loop & drop by clicking on it.

Also, please consider giving us back the ability to record directly to individual sample slots.

Thanks

Mensajes Sun 16 Nov 14 @ 8:25 am

Chreece

PRO (OEM)Member since 2014

Tried to update, the known loop message from earlier updates came back: "Update failed, do you want to try again?"
Checked the processes VirtualDJ.exe is still running and cannot be forced closed.
Windows 8.1

Mensajes Sun 16 Nov 14 @ 8:26 am

djnice :o) Country: DE

PRO InfinityMember since 2014

Some new loop problems: Smart loop not working and loop goes back by itself
try this:
1.turn on smart cue
2. turn on smart loop
3. load song and store a 8 beat loop and a hotcue at SAME place
start song and play stored loop.

1st bug:
press a button with stored loop --> Smart loop will not work!

2nd bug:
while the stored loop will play, press the hotcue button you have stored on the same place as the loop.
press 3-5x and look at the loop_in point on waveform. It goes back by itself. (see pic - bottom waveform)

3rd bug:
while the stored loop will play, press a empty hotcue button (emty slot) and jump to this Hotcue
The new hotcue set a new loop in point. This is imho not correct, too

Mensajes Sun 16 Nov 14 @ 9:38 am

metrix

PRO InfinityMember since 2007

sync didn´t work on big BPM difference, it goes the other way, rather than in + it goes in - and at - in +

Mensajes Sun 16 Nov 14 @ 10:38 am

DJNicoBarreiro Country: AR

PRO InfinityMember since 2012

Visual mp3 is disabled only when moving from one plate to the other, milkdrop not work archvios dragging on the right course ...

Mensajes Sun 16 Nov 14 @ 12:07 pm

AsTheDJ

PRO InfinityMember since 2008

DDj-SX 2 No audio on the Slicer light will light up,but if I go to the drop down slicer tab and hit 1then sound.b4 didn't had to hit tabs to turn on.

Mensajes Sun 16 Nov 14 @ 1:42 pm

kradcliffe Country: GB

PRO InfinityMember since 2008

Noticed this too. SX2 audio cuts off when slicer is selected, comes back on when a pad is pressed.

Keith

Mensajes Sun 16 Nov 14 @ 2:23 pm

djnice :o) Country: DE

PRO InfinityMember since 2014

same here

Mensajes Sun 16 Nov 14 @ 3:10 pm

djdad

PRO InfinityDevelopment ManagerMember since 2005

For controllers with Slicer & Loop Roll Mode Pads, please check again with 2048.870

Mensajes Sun 16 Nov 14 @ 4:09 pm

djdad

PRO InfinityDevelopment ManagerMember since 2005

djnice :o) wrote :

1st bug:
press a button with stored loop --> Smart loop will not work!

Smart Loop works here. What do you expect when Smart Loop is enabled ? Smart loop simply will trigger a loop at the nearest beat length if Loop In and Loop Out (manual loop) are used. The Smart Loop is not offering "Snap to beat" functionality.
And just in case you meant Smart CUe.. of course it wont work if you use the LOAD Loop button to trigger the Loop. Its not a hotcue point.

djnice :o) wrote :

2nd bug:
while the stored loop will play, press the hotcue button you have stored on the same place as the loop.
press 3-5x and look at the loop_in point on waveform. It goes back by itself. (see pic - bottom waveform)

Well, what it does here is that indeed the loop is a bit moved, but the Hotcue works as expected with Smart Cue (quantized) and if you leave the saved loop to go on, its still a seamless one. The graphic is indeed a bit confusing though.

djnice :o) wrote :

3rd bug:
while the stored loop will play, press a empty hotcue button (emty slot) and jump to this Hotcue
The new hotcue set a new loop in point. This is imho not correct, too

Setting LoopAutoMove ;)

Mensajes Sun 16 Nov 14 @ 4:33 pm

djdad

PRO InfinityDevelopment ManagerMember since 2005

metrix wrote :

sync didn´t work on big BPM difference, it goes the other way, rather than in + it goes in - and at - in +

A bit confused here. An example please ?

Mensajes Sun 16 Nov 14 @ 4:40 pm

MrBlubke

PRO InfinityMember since 2007

djdad wrote :

metrix wrote :

sync didn´t work on big BPM difference, it goes the other way, rather than in + it goes in - and at - in +

A bit confused here. An example please ?

I think he's describing the nearest match auto bpm behaviour... if a track is 150pm and you match it with one at 80bpm, it'll go to 160bpm which is + instead of -
but imho mostly wanted behavior...
however, 1 improvement could be made.. when you increase the pitch on one of the tracks it should take that in account when matching, currently, it doesn't, it matches based on the stored bpm difference...

Mensajes Sun 16 Nov 14 @ 9:48 pm

locoDog

PRO InfinityModeratorMember since 2013

@MrBlubke I'd second that. (sync based on current tempo not neutral tempo)
Although there are times I'd like to choose between absolute sync and the current sync

Mensajes Sun 16 Nov 14 @ 10:16 pm

metrix

PRO InfinityMember since 2007

it is enough a difference of 23 BPM and if you push sync you will see what happened

Mensajes Mon 17 Nov 14 @ 1:21 am

borsalinotr Country: TR

PRO InfinityMember since 2010

Using VDJ 2048.868 (version 2048.870 not updated yet)
When clicking on PFL button and turning it off there is no more sound on headphones. This happens 1st time with this new version.
Windows 8.1 OS, Controller VDJ ERGO V.

Mensajes Mon 17 Nov 14 @ 3:10 am

borsalinotr Country: TR

PRO InfinityMember since 2010

Pioneer DDJ ERGO V CROSSFADER between 2 decks doesn't work correctly with VDJ 2048.868.

Mensajes Mon 17 Nov 14 @ 3:40 am

dcomo

PRO InfinityMember since 2012

From what I understand the first four digits of the version number is the build number, and the three digits after the '.' is the skin revision. Is it still true that skin changes don't come down with the auto update process?

Mensajes Mon 17 Nov 14 @ 1:13 pm

SBDJ

PRO Infinity Member since 2006

The numbers after the . are the controller database version. Skin changes are not included in the auto-update, no.

Mensajes Mon 17 Nov 14 @ 1:17 pm

vdj_pARtybOy Country: PT

PRO (legacy)Member since 2014

Mensajes Tue 18 Nov 14 @ 6:55 am

40%

Forum: Beta Builds Regression Bugs