CONTROLS - 4 DECKS MODE

The following functionality is offered when the 4-Decks Controller-specific setting is selected (see Advanced Setup ). The Deck/Channel order is 3-1-2-4 by default, but can be changed to 1-2-3-4 (See VirtualDJ Options->MixerOrder setting).

The Top and Bottom section of the Xone K2 can be set to 2 different modes, via the LAYER button, as described in the following tables.

KEY

ACTION

SHIFT (SECONDARY) ACTION

S SHIFT

Press this button down to access secondary actions as described in the SHIFT ACTION column

M LAYER

Toggle between Control and Hotcues mode for the bottom buttons

Toggle between EQ and FX mode for the top buttons & knobs

8 FADER

Not assigned

13 SCROLL

Scroll through folders or Files depending on the focused Browser list.
When in Folders list, push to set focus to the Songs list, or long press to open/close sub-folders
When in Songs list:
- Push the Left Encoder to load the selected Track in Browser to Deck 1.
- Push the Right Encoder to load the selected Track in Browser to Deck 2

Push the Left Encoder to load the selected Track in Browser to Deck 3.
Push the Right Encoder to load the selected Track in Browser to Deck 4

TOP BUTTONS/KNOBS - EQ MODE (default)

KEY

ACTION

SHIFT (SECONDARY) ACTION

1 LOOP

Half/double the size of the Loop.
Push to enable/disable the selected Loop

When in Loop, move the loop forward/backwards by 1 Beat

2 EQ HIGH

Adjust the High Equalizer Band or the selected Stem, depending on the EQ Mode

3 EQ HIGH KILL

Push to kill/mute the High Equalizer Band or the selected Stem, depending on the EQ Mode

4 EQ MID

Adjust the Mid Equalizer Band or the selected Stem, depending on the EQ Mode

5 EQ MID KILL

Push to kill/mute the Mid Equalizer Band or the selected Stem, depending on the EQ Mode

6 EQ LOW

Adjust the Low Equalizer Band or the selected Stem, depending on the EQ Mode

7 EQ LOW KILL

Push to kill/mute the Low Equalizer Band or the selected Stem, depending on the EQ Mode

TOP BUTTONS/KNOBS - FX MODE

KEY

ACTION

SHIFT (SECONDARY) ACTION

1 LOOP/FX SELECT

Half/double the size of the Loop.
Push to enable/disable the selected Loop.

When FX SELECT mode is enabled, scroll through the Effects list. Push to select the highlighted Effect for the FX Slot

When in Loop, move the loop forward/backwards by 1 Beat

2 FX1 PRM

Adjust the 1st Parameter of the selected Effect on FX Slot 1

3 FX1 ON

Enable/disable the selected Effect of FX Slot 1

Enable the FX SELECT mode for FX Slot 1

4 FX2 PRM

Adjust the 1st Parameter of the selected Effect on FX Slot 2

5 FX2 ON

Enable/disable the selected Effect of FX Slot 2

Enable the FX SELECT mode for FX Slot 2

6 FX3 PRM

Adjust the 1st Parameter of the selected Effect on FX Slot 3

7 FX3 ON

Enable/disable the selected Effect of FX Slot 3

Enable the FX SELECT mode for FX Slot 3

BOTTOM BUTTONS - CONTROL MODE (default)

KEY

ACTION

SHIFT (SECONDARY) ACTION

9 PITCH BEND

Temporary speed up Track's Tempo

Temporary slow down Track's Tempo

10 SYNC

Sync BPM and Phase with the other (or Master ) Deck

Gradually reset Track's tempo (BPM) to the original value

11 CUE

Assign Temporary Cue when paused or return to the assigned position when playing and previews while pressed

Jumps to the beginning of the Track

12 PLAY

Plays/pauses Track

Play/stutter

BOTTOM BUTTONS - HOTCUES MODE (default)

KEY

ACTION

SHIFT (SECONDARY) ACTION

9 H.CUE 1

Assigns HotCue 1 to current position or jump to the assigned position

Deletes HotCue 1

10 H.CUE 2

Assigns HotCue 2 to current position or jump to the assigned position

Deletes HotCue 2

11 H.CUE 3

Assigns HotCue 3 to current position or jump to the assigned position

Deletes HotCue 3

12 H.CUE 4

Assigns HotCue 3 to current position or jump to the assigned position

Deletes HotCue 3