Hardware Manuals
Configuración
Firmware & Drivers
No drivers are required to be installed and no firmware update is currently available. Mixtrack Quad is a USB Class compliant device. However always check the Numark website for any updated notifications
http://www.numark.com/product/mixtrack-quad .
Connect the Mixtrack Quad to a USB port of your computer and let your Operating system to install the necessary OS drivers. Plug a pair of amplified speakers to the rear Sound Output of the unit and your Headphones to the right side socket.
VirtualDJ 8 Setup
Once VirtualDJ 8 is opened, a Login Window will appear. Login with your virtualdj.com account.
A Pro Infinity or a PLUS License is required to use the Numark Mixtrack Quad. Without any of the above Licenses, the controller will operate for 10 minutes each time you restart VirtualDJ 8.
http://www.virtualdj.com/buy/index.html
Click on the "Use Soundcard" button in order VirtualDJ to apply the pre-defined audio setup with the built-in sound card of the Mixtrack Quad (speakers need to be connected to the Master Output of the unit at the rear panel).
Click on the Change Skin button to load the default 4 Decks skin of VirtualDJ.
Click to OK
The unit is now ready to operate.
MIDI Operation
The unit should be visible in the CONTROLLERS tab of Config and the “factory default” available/selected from the Mappings drop-down list.
The factory default Mapping offers the functions described in this Manual, however those can be adjusted to your needs via VDJ Script actions.
Find more details at
http://www.virtualdj.com/wiki/VDJ8script.html
AUDIO Setup
The unit has a pre-defined Audio setup and a special button in the AUDIO tab of Config to provide that. Alternative Audio setups can be applied in the same window
For further VirtualDJ settings and features please refer to the User Guide of VirtualDJ 8.
http://www.virtualdj.com/manuals/virtualdj8/index.html