Hardware Manuals


Pioneer - XDJ-XZ - Layout

Microphone Inputs


The Pioneer XDJ-XZ offers 2 Microphone Inputs (connections at the rear panel) and separate controls at the top panel



KEY

ACTION

51 MIC 1/2 ON-OFF
Set this switcher to OFF position to prevent audio signal from the Microphone Inputs (connections at the rear panel) from output. Set the switcher to ON position to allow audio signal from the Microphone Inputs and route to the Master Output
52 MIC 1/2 TALKOVER
When enabled (led lit) the Output of all Mixer Channels will be automatically reduced when signal is detected from any of the Microphone Inputs.
53 MIC 1/2 LEVEL
Use the top/bottom knob to adjust the level of the Microphone Inputs 1/2 respectively
54 MIC 1/2 EQ
Use the top/bottom HI, MID, LOW knobs to adjust the frequencies of the Microphone Inputs signals 1/2 respectively
55 FEEDBACK REDUCER MODE
Select the Microphone Feedback Reducer mode for both the Microphone Inputs
56 FEEDBACK REDUCER ON
Enable/disable the Microphone Feedback Reducer for both the Microphone Inputs


Note that the Microphone Inputs are not part of the USB Audio Interface, thus they cant be included to the Audio Setup of VirtualDJ, and the MIC Controls of the VirtualDJ GUI will not control these inputs (or vice versa), however both audio signals will be recorded along with your mix.
Master