Apendice

List of Verbs

Flow

nothing

Do nothing.

execute different actions depending if the key if pressed or released: 'up ? action1 : action2'

down

execute different actions depending if the key if pressed or released: 'down ? action1 : action2'

isrepeat

execute different actions depending if the key is being repeated or if it's the first message (on Windows, keyboard shortcuts are usually auto-repeated while held down): 'isrepeat ? nothing : goto_cue')

Param

true (or on or yes)

returns true

false (or no or off)

returns false

constant (or get_constant)

Return the specified value Example: 'get constant 75%' always returns 75%

dim

equivalent of "constant 0.1"

color_mix

Mix two colors based on an action in the third parameter color_mix white red `get_limiter`

color

color "red" color "#C08040" color 0.8 0.5 0.25 color 75% "red" (returns a dimmed red) color 0.66 (returns a gray)

param_bigger (or param_greater)

check if the value of the calling slider/encoder/button is bigger than something: 'param_bigger 0 ? Sampler loop 200% : Sampler loop 50%' compare value of the first parameter with the value of the second parameter. Both parameters can be actions instead of values: 'param_bigger pitch pitch_slider'

param_equal

Check if the value of the calling slider/encoder/button is equal to something To compare a string with the result of an action, use param_equal `action param` "string". For example: param_equal `get_browsed_song 'type'` "audio"

param_contains

check if the value of the calling action contains the string in the parameter

param_smaller

check if the value of the calling slider/encoder/button is smaller than something: 'param_smaller 0 ? Sampler loop 200% : Sampler loop 50%'

param_add

add the given value to the value of the calling slider/encoder/button add the value of the first parameter with the value of the second parameter. Both parameters can be actions instead of values: 'param_add `get_var a` `get_var b`'

param_multiply

multiply the value of the calling slider/encoder/button by the given value: 'param_multiply 300% & effect slider' The parameter can also be an action 'cue_pos 0 & param_multiply "get_time total 1000"'

param_1_x

invert the value of the calling slider/encoder/button (calculate 1/x) 'param_1_x & effect slider'

param_pow

param_pow y : computes the power of the caller to the power of y. Can be 0.5 for calculating square root.

param_invert

invert the value of the calling slider/encoder/button (1-x): 'param_invert & pitch_slider'

param_mod

wrap the value of the calling slider/encoder if more than the given value

param_pingpong

transform the value of the calling slider/encoder from a linear scale to a forth-and-back scale

param_cast

cast the value of the previous query action into a new type: 'pitch_range & param_cast "percentage"'. Valid types are 'integer', 'float', 'percentage', 'ms', 'boolean', 'beats', 'text'. casting to text can also optionally limit the number of characters: 'get_browsed_song "artist" & param_cast "text" 5' to format a number as text with a specific number of digits: 'get_bpm & param_cast "000"' param_cast 'int_trunc' : provides the integer part of a number without rounding to the nearest integer param_cast 'frac' : provides the decimal part of a number. param_cast 'relative' and param_cast 'absolute' : change the parameter to be a relative or absolute value

param_delta

transform an absolute value into relative (example: 0.5, 0.7, 0.8 will become +0.0, +0.2, +0.1)

param_uppercase

change the text result of the previous element in the script into uppercase

param_lowercase

change the text result of the previous element in the script into lowercase

param_ucfirst

change the first letter into upper case and the rest in lower case

blink

turn on and off the LED, once per second. You can specify the speed: 'blink 1000ms' Speed can also be specified in number of beats: 'blink 1bt'. The time blinking can also be specified: 'blink 1bt 25%'

fadeout

'loop & fadeout 10000ms 3000ms' will return 100% when loop is on, and fade out to 0% after 10 seconds in 3 seconds when loop turns off Alternatively, the action can be entered as the third parameter in backticks: 'fadeout 10000ms 3000ms `loop`'

pulse

return true when the previous action turns to true only for the duration specified: 'is_using 'equalizer' & pulse 2000ms'

param_make_discrete

useful for smooth endless encoders, to make them discrete Example: 'param_make_discrete 0.1 & param_bigger 0 ? loop_move +100% : param_smaller 0 ? loop_move - 100%'

Repeat

repeat

repeat the actions every x ms as long as the key is pressed: 'repeat 1000ms & browser_scroll +1' (default is 500ms if no speed is specified. Second parameter can specify a delay before repeating the first time)

repeat_start

Repeat an action at a specified interval: 'repeat_start 'myrepeatname' 1000ms 5 & browser_scroll +1' (first parameter is an identifier name, second parameter is the interval and the third optional parameter can specify a number of times to repeat). The first action will be performed after an interval has passed.

repeat_start_instant

Repeat an action at a specified interval: 'repeat_start_instant 'myrepeatname' 1000ms 5 & browser_scroll +1' (first parameter is an identifier name, second parameter is the interval and the third optional parameter can specify a number of times to repeat). The first action will be performed immediately.

repeat_stop

stop a previous repeat_start or repeat_start_instant action: 'repeat_stop 'myrepeatname''

wait

wait for the specified amount of time between two script actions: 'wait 1bt & pause', 'wait 500ms & play'

holding

execute different actions depending if the key is pressed for a long time or not: 'holding ? automix : mix_now'. you can specify the time ('holding 1000ms'), by default it's 500ms.

doubleclick

execute different actions depending if the key is pressed twice in a short period of time or not: 'doubleclick ? automix : mix_now'. you can specify the time between two presses ('doubleclick 1000ms'), by default it's 300ms.

Skin

skin_panel (or skin_pannel)

show or hide a panel on the skin. "skin_panel 'my_panel' on"

skin_panelgroup (or skin_pannelgroup)

change which panel from a skin panel group is shown. syntax "skin_panelgroup 'groupname' 'panelname'" or "skin_panelgroup 'groupname' +1" or "skin_panelgroup 'groupname' 0.75"

skin_panelgroup_available

set a panel to be available or not. panels that are not available will not show up in group cycles

lock_panel (or lock_pannel)

NOTE: despite the name, this action acts on <split> elements, not <panel>

show_splitpanel

Show/hide the specified split panel Examples: "show_splitpanel 'sidelist'", "show_splitpanel 'sideview' on", "show_splitpanel 'sidelist' 50%"

rack

Open/close a unit in specified rack. Example: "rack 'rack1' 'unit1'"

rack_solo

Open/close a unit in full size on the specified rack. Closing the unit will re-open the previous configuration. Example: "rack_solo 'rack1' 'unit1'"

rack_prioritize

Prioritizes a unit of the specified rack. When more configurations with same size are available, the prioritized unit will get most space. Example: "rack_prioritize 'rack1' 'unit1'"

custom_button

a custom button is a button with initially no action, but the action can be written in VDJScript by the user

custom_button_name

return (or set) the name for this custom button

has_custom_button

returns true if this custom button has an action assigned to it

custom_button_edit

open the custom button editor to set or change the action

multibutton

Click on the named multibutton: 'multibutton "my_button"'

multibutton_select

Open the selection menu for the named multibutton. If a second text parameter is provided after the name, use it as the new action to load in the multibutton: 'multibutton_select "my_button" "goto_cue 2 & play"'

zoom (or zoom_scratch)

zoom horizontal rhythm and Scratch visual

zoom_vertical

zoom vertical Scratch wave

switch_skin_variation

load_skin

load a new skin. Use syntax " load_skin ':newvariation' " to load a different variation inside the same skin file.

skin_empty_buttons

is_using

check if a particular feature is being used ('filter', 'equalizer', 'loop', 'cue', 'sample', ' Pads ', 'effect', 'load')

has_logo

get_skin_color

has_cover

skin_width

skin_height

skin_starter_tip

System

get_cpu

get the cpu activity

get_peak_audio

get_clock

get the current time (use 'get_clock 12' to display AM/PM)

get_date

get the current date (use 'get_date "format"' to get the date in a specific format. format can include %Y, %m, %d for year, month and day, %A for weekday)

is_pc (or is_windows)

return true if the computer is a PC, false if it's a MAC (example: <panel visible="is_pc" />)

is_mac (or is_macos)

return true if the computer is a MAC, false if it's a PC

has_notch

return true when the display has a notch at the top center and the skin is maximized, false otherwise

system

debug

display the value of the parameter (you can use this to see what values controllers are sending, for example)

open_help

open the user guide

get_battery

returns how much battery is left on your laptop

is_battery

returns true if your computer is running on batteries

has_battery

returns true if your computer has batteries

getfood

because no DJ should work on an empty stomach

show_keyboard

display an onscreen keyboard

system_volume

Change the system volume of the active sound card when available (use has_system_volume to check)

has_system_volume

Returns true when the system volume can be modified

handshake

Perform an encrypted handshake to ensure that this plugin is currently being called by a real VirtualDJ environment. Call this passing any string, decrypt the result using VirtualDJ's handshake public key, and check that it matches what you passed. See the developer documentation on our website for example code.

Variables

var

'var "my_var" ? my_action1 : my_action2'. execute my_action1 if my_var is true (non zero), execute my_action2 otherwise. You can also compare var with a specific value: 'var "my_var" 1 ? my_action1 : my_action2' execute my_action1 is my_var is 1, or my_action2 otherwise

var_equal

syntax: 'var_equal "my_var" 42 ? my_action1 : my_action2'. execute my_action1 if my_var equals 42, execute my_action2 otherwise. syntax: 'var_equal "this_var" "that_var" ? action1 : action2' execute action1 if this_var equals that_var, execute action2 otherwise

var_not_equal

syntax: 'var_not_equal "my_var" 42 ? my_action1 : my_action2'. execute my_action1 if my_var doesn't equal 42, execute my_action2 otherwise.

var_smaller

syntax: 'var_smaller "my_var" 42 ? my_action1 : my_action2'. execute my_action1 if my_var is smaller than 42, execute my_action2 otherwise.

var_greater

syntax: 'var_greater "my_var" 42 ? my_action1 : my_action2'. execute my_action1 if my_var is greater than 42, execute my_action2 otherwise.

set_var_dialog

set_var_dialog 'varname' opens a dialog to enter the value of varname set_var_dialog 'varname' 'information text' opens a dialog to enter the value of varname, and shows the second parameter as informational text

set

set 'varname' 5 Sets variable varname to the value 5 set 'varname' 'var2' Sets variable varname to the value of variable var2 set 'varname' `play` Sets variable varname to the value of the action play

toggle

syntax: 'toggle "my_var"'. toggle my_var between true and false.

cycle

syntax: 'cycle "my_var" 42'. increment my_var, and goes back to 0 when it reaches 42. 'cycle "my_var" -42' decrements my_var, and goes to 41 after it reached 0.

get_var

get the value of the specified variable

set_var

set the value of the specified variable

var_list

show a window with a list of your current variables and their values

controllervar

variable that is unique to each controller. You can add # in front of the variable name to make it both deck and controller-dependent

Window

close the application.

minimize

minimize the application in the taskbar.

maximize

maximize the application to maximized, full screen, or back to windowed. A specific mode can be selected using "maximize 'windowed'", "maximize 'maximized'" or "maximize 'fullscreen'"

show_window

on skin with multiple windows, show or hide the specified window

open_stem_creator

Audio

song_pos

position in the song. (the difference between song_pos and goto is that song_pos can be used as a slider).

goto

change the position in the song. 'goto +10ms' jumps 10ms forward. 'goto -4' jumps 4 beats backward. 'goto 20%' jumps to 20% of the song's length.

goto_bar

put the song on its nth beat after the downbeat without loosing sync: 'goto_bar 4'

songpos_remain

get the remaining time in %. if used with a parameter (in % or ms), returns true if the time left is less or equal than the value: 'songpos_remain 500ms ? blink'.

songpos_warning

returns true if the song is in its last 30s (actual time can be adjusted in options)

seek

move into the song while the button is pressed. 'seek +2' moves beat by beat, skipping 2 beats every 10ms. 'seek +420ms' moves from 420ms every 10ms. using skip with a beat number keep the song playing correctly while moving inside.

reverse

play the song backward

dump

reverse the playback direction while dump is active, then when deactivated, start again forward from where the song should have been if it had been playing forward during the dump. when quantize_all is active, dump will be quantized to match the beats. This can also be forced by using 'dump quantized' or 'dump notquantized' to dump only while the key is pressed, use 'dump while_pressed'

goto_first_beat

automatically goes to the first beat in the song.

goto_start

go to the start of the song.

mixermode

Return true if internal mixer used ( Master output available), false if external mixer used. Parameter can also be explicit: mixermode "internal" or mixermode "external"

beat_juggle

Alternatively jumps one beat forward and backward 'beat_juggle 0.5' will jump 1/2 beat forward or backward

swap_decks

swap deck 1 and deck 2

clone_deck

clone the deck (load the same song on the other deck, and play it from the same position, ready for beat-juggling).

clone_from_deck

clone from the other deck (load the song from the other deck, and play it from the same position, ready for beat-juggling).

move_deck

load the song from the called deck into the deck specified by the parameter and unloads the song from the calling deck

stems_split

'stems_split' will duplicate deck 1 to deck 3 or deck 2 to 4, with the vocals playing on the first deck and the instruments on the other deck 'stems_split vocal target' will duplicate the opposite deck to the deck stems_split was called from

stems_split_unlink

After using stems_split, you can use stems_split_unlink to have the decks behave independently, allowing to Scratch the vocals without affecting the instrumental for example

dualdeckmode

toggle dual deck mode. when enabled dualdeckmode_decks will apply to both decks 1/3 or 2/4

dualdeckmode_decks

beatjump

Jump a certain number of beats as set by beatjump_select 'beatjump +1' to jump forward, or 'beatjump -1' to jump backwards

beatjump_select

Select the number of beats the beatjump action will jump 'beatjump_select 4' to set beatjump to 4 beats 'beatjump_select +1' to set the next higher beat size 'beatjump_select 50%' to halve the current beat size 'beatjump_select 200%' to double the current beat size

beatjump_page

change the offset of the jumps in beatjump_pad actions

beatjump_pad

execute 'goto +x' where x depends on the pad number and the beatjump_page

Audio_controls

play

start the deck.

play_stutter

if paused, start the deck. if playing, restart from last stutter point.

play_pause

if paused, start the deck. if playing, pause the deck.

pause_stop

if playing, pause the deck. if stopped, rewind to beginning of the song, then cycle through all cue points each time pressed.

stop

stop to the last cue point, then on second press to the beginning of the song, then cycle through the cue points.

pause

pause the deck.

play_button (or play_3button)

depending on the play_mode, act like play_stutter (Numark way) or play_pause (Pioneer way).

stop_button (or stop_3button)

depending on the play_mode, act like pause_stop (Numark way) or stop (Pioneer way).

play_options

show a context menu to select the behavior of the play and cue buttons, and the various smart modes

auto_sync_options

show a context menu to control the various auto-sync options

deck_options

show a context menu to select the behavior of the play and cue buttons, the various smart modes, and pitch options

blink_play

blinking fast when less than 10 seconds remaining, blinking slow when less than 30 seconds remaining, off otherwise 'blink_play on' is similar, but is on when the song is paused, and only off if no song is loaded or the loaded song has an error

emergency_play

play something

Audio_inputs

mic (or microphone)

activate or deactivate the microphone input

mic_talkover

Lower the volume of all decks while active and activates microphone Use 'mic_talkover while_pressed' to only activate mic as long as button is held Use 'mic_talkover 20% 1000ms' to lower deck volumes to 20% and fade to the volume in 1 second. (Defaults are 30% and 400ms)

mic_eq_low

mic_eq_mid

mic_eq_high

djc_mic

aux_volume

linein

Activate or deactivate the linein on this deck. You can also specify a linein number to assign another linein: "deck 1 linein 2 on" Or you can assign the microphone or aux input: "deck 3 linein 'mic' on" or "deck 3 linein 'aux' on" If you don't want the line in to become the Master deck automatically, you can use "deck 3 linein 'trs'"

linein_rec

Record the linein input on this deck.

mic_rec

Record the microphone input on this deck

Audio_scratch

touchwheel (or scratch_wheel or scratchwheel)

used for a jogwheel with touch sensitivity. 'touchwheel +1.0' means a full rotation of the wheel.

get_scratch_direction

touchwheel_touch (or scratch_wheel_touch or scratchwheel_touch or speedwheel_touch)

use when the touchwheel is touched, to hold the song and start to Scratch .

jogwheel (or jog or jog_wheel)

used for a jogwheel without touch sensitivity. 'jogwheel +1.0' means a full rotation of the wheel.

motorwheel

used for a motorized jogwheel. Each time the jogwheel moves, send 'motorwheel "move" +1.0' followed by 'motorwheel "timestamp" 1000.0'. 'move +1.0' means a full platter rotation. 'timestamp 1.0' means 1ms since last message. You should query 'motorwheel' and turn the motor on when it returns true and off when false.

speedwheel

used for a precision touchwheel that reports both position and speed. 'speedwheel +1.0 1.5' means a full rotation of the wheel, at 150% speed.

vinyl_mode

Set the jogwheel to Vinyl mode (with Scratch ), or to CD mode (with pitchbend)

wheel_mode

change the mode of the jogwheel between: "jog", "search", "loop_move", "loop_out", "loop_in", "browser", or use +1 and -1 to cycle through all modes. You can select from a subset using a syntax like 'wheel_mode "loop_move,loop_in,loop_out" +1'.

hold (or scratch_hold)

'hold on' or 'hold off' (or 'hold toggle') to stop the disc for scratching, or release it.

Scratch

' Scratch +120ms' to Scratch 120ms forward.

nudge

'nudge +120ms' to nudge the song 120ms forward (using mastertempo if it's activated).

slip_mode

While in slip mode, during Loops hotcues or Scratch , the play cursor will keep moving unaffected, and will resume from there after release

get_slip_active

get_slip_time

Get the time where the song will be when slip mode is de-activated in milliseconds Alternatively, use get_slip_time "min", get_slip_time "sec" and get_slip_time "msec"

slip

activate or deactivate a global slip mode, that will save the position on "slip on" and resume where it should have been if untouched on "slip off", letting you do any Scratch /loop/effect/etc in between

scratch_dna

execute a Scratch defined by its DNA signature (see scratch_dna_editor for information about DNA signatures)

scratch_dna_option

set some options about the Scratch DNA behavior. options are "drymix" and "quantized"

scratch_dna_editor

open a visual editor to compose Scratch DNA signatures

Audio_volumes

crossfader (or crossfader_slider)

move the crossfader. crossfader 0% will only let the left deck out, crossfader 100% will only let the right deck out.

auto_crossfade (or auto_crossfader)

Automatically crossfade to the other deck. You can specify the duration of the crossfade in ms: 'auto_crossfade 2000ms' Assigned to a slider, or specifying a specific position, it will move the crossfader slowly to that position: 'auto_crossfade 50%' or 'auto_crossfade 1000ms 50%'

level (or level_slider or volume or volume_slider)

set the volume of the deck

mute

Mute a specific deck

mic_volume

Set the volume of the microphone

mic2_volume

Set the volume of the second microphone

gain (or gain_slider or power_gain)

set the gain of a deck

gain_label

get the text to display under the gain knob

gain_relative

change the gain, relative to the software gain position

set_gain

set the gain in order to bring the song to the specified dBA (with 0dBA being the maximum level outputable by the soundcard without compression): 'set_gain 0'

mono_mix

Mix left and right channels together for all outputs

fake_mixer

tell VirtualDJ not to apply the volumes to the sound output

fake_eq

tell VirtualDJ not to apply the equalizer to the sound output

fake_gain

tell VirtualDJ not to apply gain to the sound output

fake_hp

tell VirtualDJ not to apply headphone volume to headphone sound output

fake_hpmix

tell VirtualDJ not to apply headphone mix to headphone sound output

fake_pfl

tell VirtualDJ to disable pfl switch from skin, when pfl can only be controlled from controller or mixer

fake_master

tell VirtualDJ not to apply Master volume to Master sound output

colorfx_prefader

color fx are prefader (required for some controllers)

fake_filter

tell VirtualDJ not to apply filter to sound output

master_volume

set Master volume

headphone_volume

set cue volume

booth_volume

set booth volume

headphone_mix

change the mix of the PFL (0% is only the cued deck, 100% is the Master output).

headphone_crossfader

change the PFL fader (0% is only the left deck, 100% is only the right deck).

headphone_gain

change the gain of the PFL output (from -30dB to +30dB)

master_balance

change the left/right balance on the Master output.

levelfader_curve (or fader_curve)

select the curve of the level faders. 0% is a linear curve, 50% (default) is a quadratic curve, 100% is a cubic curve

crossfader_hamster

invert the crossfader.

crossfader_curve

select the curve of the crossfader. enter a value to adjust the slope from a X curve (0%) to a inverted-U curve (100%). you can also specify common curves by name ("smooth", "full", " Scratch ", "cut"). or you can draw your own curve, using a syntax like 'crossfader_curve "0=[1,0]/0.5=[1,1]/1=[0,1]"'.

crossfader_disable

disable the crossfader

get_limiter

return true if the limiter is compressing because the signal was saturated. Use 'deck 1 get limiter' to get the limiter on a deck in external mixer mode, or 'get_limiter' (or 'get_limiter " Master ") to get the limiter on the Master for internal mixing mode (also can use 'get_limiter "headphones"' and 'get_limiter "booth"')

get_level

Get level of signal before Master volume. If no deck is specified will get Master level Use "get_level 'mic'" for microphone level, or "get_level ' Sampler '" for Sampler level

get_level_log

Similar to get_level, but returns level on logarithmic scale where -127dB=0.0 and 0dB=1.0

get_level_peak

Get peak level of signal before Master volume. If no deck is specified will get Master peak level.

get_level_left

Get level of left channel before Master volume. If no deck is specified will get Master level.

get_level_left_peak

Get peak level of left channel before Master volume. If no deck is specified will get Master peak level.

get_level_right

Get level of right channel before Master volume. If no deck is specified will get Master level.

get_level_right_peak

Get peak level of left channel before Master volume. If no deck is specified will get Master peak level.

get_vu_meter

Get level of signal after Master volume. If no deck is specified will get Master level. Use "get_vu_meter 'mic'" for microphone level or "get_vu_meter ' Sampler '" for Sampler level

get_vu_meter_peak

Get peak level of signal after Master volume. If no deck is specified will get Master peak level.

get_vu_meter_left

Get level of left channel after Master volume. If no deck is specified will get Master level.

get_vu_meter_left_peak

Get peak level of left channel after Master volume. If no deck is specified will get Master peak level.

get_vu_meter_right

Get level of right channel after Master volume. If no deck is specified will get Master level.

get_vu_meter_right_peak

Get peak level of right channel after Master volume. If no deck is specified will get Master peak level.

is_audible

active if the deck is playing and volume is up (on-air)

get_crossfader_result

get the actual volume balance between deck 1 and 2, based on crossfader, levels, and play (use get_crossfader_result "full" to show levels even for paused decks)

Automix

automix

Start or stop automatic playlist mixing

automix_dualdeck

Enable or disable automix using both decks

automix_skip

When automix is active, skip the current song and mix to the next one

mix_now

Smoothly crossfade from one side to the other, matching beats when the tempo of both songs is close together When automix is off, fade speed can be adjusted: "mix_now 4000ms" or "mix_now 4bt"

mix_now_nosync

Smoothly crossfade from one side to the other When automix is off, fade speed can be adjusted: "mix_now_nosync 4000ms" or "mix_now_nosync 4bt"

mix_selected

When automix is active, mix to the song currently selected

mix_next

If the non-playing deck has a song loaded that has already been played, load a new one from the playlist. Then smoothly crossfade from the playing deck to the other, using beatsync if appropriate

mix_next_sidelist

If the non-playing deck has a song loaded that has already been played, load a new one from the sidelist. Then smoothly crossfade from the playing deck to the other, using beatsync if appropriate

mix_and_load_next

automatically mix to the next deck, then stop the current track and load a new song if something is available in the playlist or sidelist by default this will to a tempo mix and sync bpm if the bpm is in range. You can add 'nosync' to mix without tempo synchronization. 'mix_and_load_next nosync'

get_automix_song

get a property from the next song in automix: "get_automix_song 'title'" you can also get properties from songs further down: "get_automix_song 'title' 2"

playlist_options

display a drop-down with the list of options for the playlist.

sidelist_options

display a drop-down with the list of options for the sidelist.

automix_add_next

Add the songs selected in the browser to the automix playlist right after the song currently playing If a song in the automix list is selected and automix is active, move it after the currently playing song

get_automix_position

Return position of currently playing song in automix list

playlist_add

Add the songs selected in the browser to the automix list

playlist_load_and_remove

Load the first song in the automix list on the deck, and remove it from list

playlist_load_and_keep

Load the first song in the automix list on the deck, without removing it from the list

switch_sidelist_playlist

Exchange the content of the automix list and the sidelist

create_list_from_playlist (or create_virtualfolder_from_playlist)

Save the automix list in MyLists

playlist_randomize

shuffle the order of the songs in the playlist.

playlist_randomize_once

shuffle the order of the songs in the playlist once.

playlist_repeat

repeat (or stop to repeat) the playlist while automixing.

playlist_clear

empty the playlist.

playlist_save

save the playlist in a file.

playlist_remove_played

remove from the playlist all the songs that have already been played since the software was launched.

playlist_remove_duplicates

remove duplicate songs from the playlist.

automix_editor

Open the automix editor, and fine-tune the automix transitions for every songs in your playlist

automix_editor_movetrack

When the automix editor is opened, move the selected track's position automix_editor_movetrack 'current' +10 Also accepts 'next' or 'previous' to move the next or previous track. When the number is not given it can be mapped to rotary knobs or jog wheels

relay_play

Enable or disable the decks to automatically start playing when the opposite deck reached its end

get_playlist_time

Gets how much time is left before the end of the automix playlist

Browser

add_favoritefolder

make the selected folder a favorite folder (monitored folders).

add_filterfolder

create a new filter folder.

add_list (or add_virtualfolder)

create a new list (virtual folder).

goto_last_folder

Go back to the last browsed folder

browser_scroll

scroll through the songs or folders. 'browser_scroll +1' or 'browser_scroll -1' to scroll one line, or "browser_scroll 'top'", "browser_scroll 'bottom'" to scroll to the beginning or end

browser_move

browser_move +1 : Moves the currently selected song in a playlist down browser_move 'top' or browser_move 'bottom' : Moves the selected song to the top or the bottom of the list

browser_folder

if focus is on songs, change focus to folders. if focus is on folders, open or close the subfolders of the selected folder.

browser_enter

if focus is on songs, load the selected song. if focus is on folders, change focus to songs.

browser_open_folder

Expand selected folder in browser when closed, or close folder when opened. You can also use 'browser_open_folder off' to always close the folder, or 'browser_open_folder on' to open a folder

browser_remove

Remove the selected song from playlist

browser_window

Change the active browser zone. "browser_window 'folders'", "browser_window 'songs'", "browser_window 'sideview'", or "browser_window 'automix'", "browser_window 'sidelist'", "browser_window ' Sampler '" Cycle through available browser zones. "browser_window +1", "browser_window -1" Cycle through specified zones. Example "browser_window 'folders,songs'"

put the keyboard focus on the search zone, or, if a text parameter is specified, search for this text.

search_add

add the specified text to the search query

search_delete

remove the last character from the search query

clear_search

clear the search string

edit_search

put the keyboard focus in the search zone but keep the actual search string.

log_search

log the current search in the SearchLog.txt file, so you can easily search for your failed requests once the gig is over.

search_playlists

open a dialog to search which list contains a specific song by default it searches for the song selected in the browser. Use "search_playlists deck" to search for the song loaded on the deck.

search_folder

open a dialog to search for folders or playlists by name

grid_view

put the browser in grid-view mode, optimized for touch screens

view_options

popup the list of view options. to set one directly, you can use 'view_options "showkaraoke" on' etc...

sideview_options

show the context menu to add or remove folders shortcuts to the sideView

sideview_triggerpad

set the sideview Sampler in triggerpad mode or in list mode

file_info

Open the Tag Editor for the specified or loaded song.

browsed_file_info

open the Tag Editor for the browsed song.

browsed_file_color

set the color of the file currently selected in the browser. Example: browsed_file_color "red" Use browsed_file_color "reset" to clear the color and set the color back to default

browsed_file_reveal

open the OS file manager to the browsed song

browsed_file_analyze

reanalyze the current file selected in the browser use 'browsed_file_analyze multi' to do a scan for multiple bpms

browsed_file_prepare_stems

prepare Stems for the file(s) currently selected in the browser

browsed_file_reload_tag

Reload tag of file currently selected in browser. This will overwrite changes made in the VirtualDJ database by what is saved in the file's tag.

browsed_file_rename

rename the current file selected in the browser

set_browsed_file_bpm

set the bpm of the selected songs to the set value: 'set_bpm 129.3', or relative to the actual value: 'set_bpm 50%'

load

load the selected song on the deck. you can also specify a fullpath to load 'load "path_to_my_song"'.

load_pulse

return a brief false then true again when a new song is loaded

load_pulse_active

return true when a new song becomes audible for the specified duration. Can be delayed using the second parameter. 'load_pulse_active 1000ms 5000ms' will return true for 1 second, 5 seconds after a new song becomes audible

loaded

return true if a song is loaded on the deck

undo_load

Unload the song and reload the previous song. Use 'undo_load any' to unload from the last deck a song was loaded on. Otherwise the deck the action is called from is used.

unload

unload the song from the deck.

browser_isactive

return true when the browser was used by a controller in the past 6 seconds

not_played

don't mark the song on this deck as 'played'.

browser_gotofolder

'browser_gotofolder' goes to the folder containing the current file. 'browser_gotofolder "/my_path/my_folder"' goes to the specified folder. 'browser_gotofolder 4' goes to the fourth virtual/favorite folder.

recurse_folder

display the content of both the selected folder and all its subfolders in the browser list.

browser_sort

Sort the browser files on the specified column: 'browser_sort "artist"', 'browser_sort "lastplay"',... To sort in descending order, add a - in front of the column name: 'browser_sort "-bpm"' To explicitly sort in ascending order, add a + in front of the column name: 'browser_sort "+bpm"' To reset the sort order of a playlist to it's original order, use 'browser_sort "Original Sort Order"'

sideview_sort

Sort the sideview on the specified column: 'sideview_sort "artist"', 'sideview_sort "lastplay"',...

playlist_load

Load the folder or playlist selected in the browser in the playlist. Use "playlist_load 'append'" to add the selected folder to the playlist instead of replacing the existing playlist

sidelist_load

Load the folder or playlist selected in the browser in the sidelist Use "sidelist_load 'append'" to add the selected folder to the sidelist instead of replacing the existing sidelist

karaoke_load

Load the folder or playlist selected in the browser in the karaoke list Use "karaoke_load 'append'" to add the selected folder to the karaoke list instead of replacing the existing karaoke

edit_comment

open a window to edit the comment on the selected track.

search_options

popup the list of search options. to set one directly, you can use 'search_options "composer"' to toggle search of the field on or off

add_to_list (or virtualfolder_add)

Add the currently selected songs in the browser to the specified List. 'add_to_list "my_list"'

font_size

Change browser font size. Example: font_size +1

sidelist_clear

clear the sidelist.

sidelist_add

Add the songs selected in the browser to the sidelist

sidelist_load_and_remove

load the first song from the sidelist, and remove it from the sidelist.

sidelist_load_and_keep

load the first song from the sidelist.

karaoke_add

Add the songs selected in the browser to the karaoke list

edit_singer

Pops up the dialog to change the singer of the currently selected song in the karaoke list

file_count

Get number of files currently shown in browser You can also use 'automix', 'sideview', 'karaoke' or 'sidelist' as parameter to get the count in other lists. "file_count automix"

sideview

Show a specific folder in the sideview. Available sideviews are automix,sidelist,karaoke, Sampler ,clone Use 'sideview +1' or 'sideview -1' to scroll between available sideviews

sideview_title

Show the title of the folder selected in sideview

info_options (or infos_options)

show the context menu about the info panel fields and prelisten behavior

page

save_deck_set

Save the current configuration (which song is loaded on which deck) in a file

load_deck_set

Reload a previously saved deck_set file

browser_options

show the context menu about the browser filters, root folders, database, etc

browser_export

Export the current list of files to a CSV or HTML file

rating

Get or set the rating for the current song

browser_zoom (or browser)

browser_geniusdj

Lookup recommendations based on the items currently selected in the browser Use 'browser_geniusdj playing' to use the currently playing track instead of the track selected in the browser

browser_padding

Change the padding around lines in folder and list views. Example: browser_padding 50%

load_next

Load next track. You can use 'load_next keepplay' to start playing the loaded song if the currently loaded song was playing

load_previous

Load previous track

sidereco_options

Show a menu to select what should be displayed in the sideview recommendation panel

sidereco_song

sidereco_source

mark_linked_tracks (or mark_related_tracks)

Mark the tracks in deck 1 and 2 as linked. (Linked tracks can be shown in the Remixes tab of the sideview)

has_linked_tracks

Returns true when track has links to other tracks. On a button can be used to show the linked tracks in the sideview You can also use 'has_linked_tracks browsed' to get the result for the currently browsed track Passing a script that returns a full file path is also possible using 'has_linked_tracks `script`'

has_quick_filter

Return true if quick filter with given index exists

quick_filter

Apply or remove a quick filter on the list of song shown in the browser

browser_shortcut

'browser_shortcut': assign the current folder as a new shortcut\n'browser_shortcut X': go to the folder assigned to the Xth shortcut

Config

settings (or config)

open the configuration window.

smart_loop

when smart_loop is on, loop are automatically adjusted to sound perfect

smart_play (or auto_sync)

when smart_play is on, songs are automatically synchronized when started

smart_cue

when smart_cue is on, songs are automatically re-synchronized when jumped to a new position or cue

auto_match_bpm

when Auto Match BPM is on, songs are automatically set to the same BPM when loaded

auto_match_key

when Auto Match KEY is on, songs are automatically set to a compatible KEY when loaded, if possible

auto_pitch_lock

when Auto Pitch Lock is on, pitch_lock engages whenever BPMs are matched, so that moving manually one pitch slider will move the other in order to keep the match

quantize_loop

when quantize_loop is on, Loops automatically align according to the globalQuantize setting

quantize_setcue

when quantize_setcue is on, setting cues automatically align according to the globalQuantize setting

smart_scratch

when smart_scratch is on, backward scratching is automatically muted, only forward scratching will be heard

play_mode

set the mode for play/stop/cue buttons: 'play_mode "numark"', or 'play_mode "pioneer"'.

save_config (or saveregistryconfig)

save your config changes now (usually changes are saved automatically when you close virtualdj)

auto_cue

set the auto_cue mode: "off", "on", "always".

setting

read or write a specific setting (see config window for the list of all settings names) Example: setting "jogSensitivityScratch" 80% Example: setting "videoRandomTransition" on

setting_setsession

force a specific value for a setting during this session

setting_setsession_deck

force a specific value for a setting during this session for a specific deck

setting_setdefault

change the default value for a setting during this session

setting_reset

reset a setting to its default value

setting_ismodified

fader_start

enable or disable fader start

get_lemode

return true if we are running a LimitedEdition

apply_audio_config

eventscheduler_start

Start the Event Scheduler (can specify one specific saved schedule: eventscheduler_start 'summer_wedding')

eventscheduler

Open the Event Scheduler

connect

Controllers

get_controller_name

return the name(s) of the controller(s) assigned to this deck

get_ns7_platter

get_denon_platter

get_pioneer_loop_display

get_controller_image

Use in controller mappings to get the cover art from deck for use on controllers with screens

get_pioneer_display

pioneer_play

On when playing, off when no track loaded, blinking when paused or playing with cue stutter

pioneer_cue

On when playing or paused on cue, blinking when paused and not on cue, off when no track loaded

numark_waveform_zoom

Set numark waveform zoom (value from 0 to 3, or +1, -1 to step through zoom levels)

get_numark_waveform

get_rotation_cue

get the angle of the cue point on the disc

get_rotation_slip

get the angle of the slip point on the disc when slip is active, or regular get_rotation otherwise

get_numark_beatgrid

get_numark_songpos

get_gemini_display

get_gemini_waveform

gemini_waveform_zoomlevel

get_denon_cuepoints

'get_denon_cuepoints 100' for a led bar with 100 leds. Number must match the number of leds in the led bar in the definition.

menu_button

defines a button whose behaviour can be changed by a menu. Syntax: 'menu_button 1 "hotcue, Sampler ,effect,loop"'.

display a menu on the controller's screen, that allows to change the behaviour of the menu_buttons. you can navigate through the menu using the browser_scroll action'.

menu_cycledisplay

on single-line controllers, cycle display when no menu is shown between artist - title, artist or title

get_display

get some text to display. depending on the latest action, it can be the name of an effect, the folder being browsed, the title of the current song, etc... for multiline displays, you can add the line number: "get display 1", "get display 2".

get_controller_screen

shift

set or query the built-in shift variable, used for controllers

display_time

set the mode to display time: "total", "remain", "elapsed", +1 or -1.

show_text

Show text on controller display. (If your controller uses get_display for the displays) "show_text 'Line 1|Line 2' 3000ms" will show 2 lines of text for 3 seconds (time optional, | separates lines) "show_text '$myvar$'" shows the contents of the variable $myvar

action_deck

return true if the button calling this action is on the specified deck: 'action_deck 1 ? actionA : actionB'

set_deck

use script or implicit variable to affect which deck the action is applied to example: 'set_deck `get_var varname` & play'

device_side

Assign a different action for a button or slider of a device depending on which side of the device it is on: "device_side 'left' ? action_for_left : action_for_right" For more than 2-deck controllers, you can use "device_side 1 ? action1 : device_side 2 ? action2 ? device_side 3 ? action3 : etc..."

invert_controllers

Invert the deck of the controllers

rescan_controllers

rescan for newly connected controllers.

reinit_controller

Reinit the specified controller (or all if none specified), going through the exit and init sequences (you can specify a delay between exit and init: "reinit_controllers 'mycontroller' 200ms".

midiclock_active

Toggle sending midiclock to the specified controller

miditovst_active

Toggle sending midi from a specific controller to the specified deck's VST instruments or effects

refresh_controller

refresh the display of the specified controller (or all if none specified).

assign_controller

Assign a specific controller to this deck. 'deck 1 assign_controller "CDJ400" 2' assigns the second CDJ400 to deck 1 Or in a controller Mapping 'deck 1 assign_controller' will assign the controller the action was executed from to deck 1.

ns7_platter

phase_movement

phase_position

controller_battery

v7_status

motor_switch

assign this deck to be controlled by the motorized wheel

denon_platter

motorwheel_instant_play

when set to on, the song will start instantly, bypassing the ramp up time the motor takes to reach its full rotation speed (the drawback is that then you cannot hold the disc still when your start the motor)

djc_shift

djc_button

djc_button_popup

djc_button_slider

djc_button_select

djc_panel

mixer_order

For controllers with 4 decks, specify the order of the decks, from left to right. Default: "mixer_order 3124"

effect_fxsendreturndeck

effect_fxsendreturndeck_multi

Select which source to apply fx to for a specific send/return channel in case there are more than one 'deck 1 effect_fxsendreturndeck_multi Master ' : Apply Master fx on the first fx send/return pair 'deck 2 effect_fxsendreturndeck_multi mic' : Apply mic fx on the second fx send/return pair 'deck 2 effect_fxsendreturndeck_multi 4' : Apply deck 4 fx on the second fx send/return pair

effect_fxsendreturnenable

os2l_button

Send a command to a DMX software over OS2L: 'os2l_button "blackout"', 'os2l_button "fog machine" while_pressed', etc. If you want to specify a page, you can use 'os2l_button "mypage" "mybutton"'. If the DMX software doesn't send feedback commands, os2l_button acts as a flash button (it sends 'on' when pressed, 'off' when released) - use 'os2l_button "mybutton" on' to not send commands on release. If the DMX software sends feedback commands, os2l_button acts as a toggle button (it sends the opposite of the last feedback when pressed, nothing on release) - use 'os2l_button "mybutton" while_pressed' to send a command on release.

os2l_scene

similar to os2l_button, but sends 'on' to the DMX software only if the button was not active yet, and only if the deck is audible. (requires feedback from the DMX software) when the deck is not audible, the scene will be queued and started when the deck becomes audible os2l_scene "scene1" os2l_scene "mypage" "myscene"

os2l_cmd

Send a numeric command to a DMX software over OS2L: 'os2l_cmd 42 on' or 'os2l_cmd 43 50%'

os2l_info

rzx_touch

rzx_touch_x

rzx_touch_y

controller_mapping

Assign a Mapping to a controller 'controller_mapping "My Mapping "' assigns the Mapping 'My Mapping ' to the controller the command was executed on 'controller_mapping "CDJ400" "My Mapping "' assigns the Mapping 'My Mapping ' to all CDJ400s 'controller_mapping "CDJ400" "My Mapping " 2' assigns the Mapping 'My Mapping ' to the second CDJ400

controllerscreen_deck

keyboard_shortcuts

Map to CTRL or ALT. While pressed will show keyboard overlay in browser. Double-press to activate sticky keys. Accepts time to delay showing overlay (keyboard_shortcuts 500ms). In scripts can also be used to turn on or off the overlay manually (keyboard_shortcuts on)

select_master_output

Select if the audio should be played on the computer speakers or on the controller audio output

Cues

cue_stop

if playing, pause and go to the last cue point. if paused, set the current position as cue point, and preview the cue as long as pressed. you can specify a number ('cue_stop 1', 'cue_stop 57') to work with several cues.

cue_play

if playing, pause and go to the last cue point. if paused, set the current position as cue point, and preview the cue as long as pressed. if you kept pressed more than 2s (or the time specified), it will continue playing once you release. syntax: 'cue_play 1 1000ms'

cue

if playing, go to the last cue point and continue playing. if paused, set the current position as cue point, and preview the cue as long as pressed. if in loop, change loop_in to the cue point but keep the loop's length. you can specify a number ('cue 1', 'cue 57') to work with several cues.

hot_cue (or hotcue)

if no cue point is set, or if 'cue', 'cue_stop' or 'cue_play' is pressed, set one at the current position. otherwise go to the cue point and start or continue playing. if in loop, set the cue point as new loop_in but keep loop_length. you can specify a number ('hot_cue 1', 'hot_cue 57') to work with several cues.

silent_cue

Mute track when enabled until a hot cue is activated

cue_select

Select the nth cue point as default cue point for cue, hotcue, etc.. actions. Does not change position to the selected cue point.

cue_cup

if playing, rewind to the last cue point, and start again on release. if paused, set the current position as cue point.

cue_button (or cue_3button)

act like cue_stop, cue_play or cue_cup depending on the cueMode setting

set_cue

store the current position in the cue. if one parameter is given, it's the number of the cue to use. if two parameters are given, the second is the position to store, in ms, in beats, or in percentage of the song length.

goto_cue

Go to the specified cue. Example "goto_cue 1", "goto_cue +1", "goto_cue -1" "goto_cue" will jump to the currently selected/last used cue.

delete_cue

Deletes a stored cue point. If no cue number is specified, it will delete the currently active cue point

cue_pos

"cue_pos 1" returns the position of cue point #1 as a percentage "cue_pos 1 msec", "cue_pos 1 sec", "cue_pos 1 min" returns the position of cue point #1, msec, sec and min parts "cue_pos 1 mseconly" returns the position of cue point #1 in milliseconds "cue_pos 1 beats" returns the position of the cue point in number of beats from first beat

cue_name

"cue_name 1" returns the name of cue point #1, or changes the cue point when pressed

cue_action

get_cue

returns the currently active cue, or 0 if no cue point is active

has_cue

returns true if the specified cue number is set

cue_countdown

count down to the next cue (or end) in beats use 'cue_countdown color' or 'cue_countdown name' to get the name or color of the next cue point

cue_countup

count up from the last cue point (or start) in beats use 'cue_countup color' or 'cue_countup name' to get the name or color of the last cue point

cue_counter

count up or down to the nearest cue point in beats use 'cue_counter color' or 'cue_counter name' to get the name or color of the nearest cue point

lock_cues

lock/unlock the cues for this particular song, so that cue actions cannot inadvertently modify them while you're playing

shift_all_cues

shift all the cues of the song from the given amount (can be used to fix the cues from v7 imported files in case the automatic fix didn't work properly): 'shift_all_cues -10ms'

cue_color

query or set the color of a cue point Query example: cue_color 1 Set example: cue_color 1 'yellow'

cue_loop

Jump to a cue and stay in a loop. Use cue_loop_hold to select if loop is temporary, or stays until pressed again. When the cueLoopAutoSync option is enabled, jumping to the cue is beat synchronized

cue_loop_hold

Toggle cue_loop between looping while pressed and turn loop on/off

cue_loop_autosync

cue_display

Show information about a cue point based on the cueDisplay config option. Example: 'cue_display 1' Can also be used to modify the cueDisplay option by using +1 or -1 as parameter: 'cue_display +1' The cueDisplay option can also be set by name: 'cue_display name'

sort_cues

sort cue points chronologically

cues_options

Show some options about cues

Deck_select

select

select this deck as 'working deck'. the beat of the working deck will be shown in front in the display, and shortcuts and actions with no specified deck will affect this deck.\nUnless PFL has been set manually, the PFL will also follow the working deck.

masterdeck_auto

remove the masterdeck selection and put back automatic masterdeck behavior

masterdeck

select/unselect this deck as ' Master deck'. When a Master deck is set, all synchronization operations will take the Master deck as reference. (for skins with more than 2 decks)

leftdeck

select this deck to be the left deck: "deck 3 leftdeck" or "leftdeck +1"

rightdeck

select this deck to be the right deck: "deck 3 rightdeck" or "rightdeck +1"

invert_deck

switch leftdeck between deck 1 and deck 3 or rightdeck between deck 2 and deck 4 "invert_deck" to swap the calling deck, or "invert_deck 'left'", "invert_deck 'right'" to specifically switch left or right deck

leftcross

assign this deck to the left of the crossfader: "deck 3 leftcross" "deck 3 leftcross 'only'" to assign only deck 3 to left of the crossfader "leftcross 'none'" to disable the left crossfader

rightcross

assign this deck to the right of the crossfader: "deck 3 rightcross"

cross_assign

assign this deck to a side of the crossfader: "deck 3 cross_assign 'left'" or "deck 3 cross_assign 'thru'"

pfl

select if this deck is sent to the headphones. (can be used with a slider or a % to specify the volume: 'pfl 75%')

get_deck_color

return blue or red if the deck is the left deck or right deck (and gray otherwise). Can be used with a darkness modifier: 'get_deck_color 50%' Use 'get_deck_color "absolute"' or 'get_deck_color "absolute" 50%' to get a color based on actual deck rather than left/right (red for deck 1, blue for deck 2, orange for deck 3, green for deck 4)

Equalizer

eq_mode

Select the behavior of the EQs knobs (frequency, modernEQ or EZRemix) Can be used to switch between Frequency and your preferred Stems mode using 'eq_mode +1' To change the eq mode only for a single deck, use "eq_mode +1 deck" (or "deck 1 eq_mode +1 deck" to specify deck 1 in your script) To select a specific behavior, you can use "eq_mode frequency", "eq_mode modernEQ", "eq_mode ezRemix" or "eq_mode Stems "

mute_stem

mute one stem. Stem names are: "HiHat", "Vocal", "Instru", "Bass", "Kick", or you can use aggregate Stems : "Melody" (Instru+Bass), "Rhythm" (HiHat+Kick), "MeloRhythm" (Instru+Bass+HiHat+Kick)

only_stem

keep only one stem. Stem names are: "HiHat", "Vocal", "Instru", "Bass", "Kick", or you can use aggregate Stems : "Melody" (Instru+Bass), "Rhythm" (HiHat+Kick), "MeloRhythm" (Instru+Bass+HiHat+Kick)

stem_pad

mute a stem (or isolate if pressed with Shift). Stem names are: "HiHat", "Vocal", "Instru", "Bass", "Kick", "Rhythm", "MeloRhythm", "Acapella", "Instrumental"

has_stems

Return true if the track has Stems available. Can also be called with 'has_stems "2.0"' to check for new engine, or 'has_stems "ready"' to check if Stems are ready at the current playing position

stems_bleed

Control how much the fast Stems separation algorithm will allow bleeding. The action affects one of the four bleeding values (MuteVocal, MuteInstru, OnlyVocal, OnlyInstru) depending on what is currently muted or isolated on the deck. (NOTE: this does nothing on the regular HiQuality algorithm)

high_label

mid_label

low_label

eq_high (or eq_high_slider)

change the amount of HiHat, Vocal or High (depending on EQ control mode).

eq_mid (or eq_med or eq_mid_slider)

change the amount of Melody, Vocals or Medium (depending on EQ control mode).

eq_low (or eq_low_slider)

change the amount of Kick or Low in the mix (depending on EQ control mode).

stem

Change the amount of a stem in the mix. Stem names are: "HiHat", "Vocal", "Instru", "Bass", "Kick", or you can use aggregate Stems : "Melody" (Instru+Bass), "Rhythm" (HiHat+Kick), "MeloVocal" (Melody/Vocal). To get kill on left side and isolate on right side of the slider, you can use "FullVocal", "FullMelo" and "FullRhythm" To map a slider to always control the equalizer, regardless of EQ mode, you can use "stem FreqHi", "stem FreqMid", and "stem FreqLo"

eq_high_freq

set the treble equalizer

eq_mid_freq

set the medium equalizer

eq_low_freq

set the bass equalizer

eq_kill_high

mute the treble

eq_kill_mid (or eq_kill_med)

mute the medium.

eq_kill_low

mute the bass.

eq_crossfader_high

crossfade the treble between both decks

eq_crossfader_mid (or eq_crossfader_med)

crossfade the center frequencies between both decks.

eq_crossfader_low

crossfade the bass between both decks

eq_reset

reset the equalizer.

filter_activate

enable or disable the deck filter

filter (or filter_slider)

apply the selected colorfx to the sound (nothing applied at 50%, and more applied the farther from the center)

filter_label

get the text to display under the filter knob (use filter_label "clean" to always get the value, and filter_label "name" to always get the name)

filter_resonance

change the resonance of the filter

filter_selectcolorfx

Select the color effect controlled by the filter knob

Get

get_beat

get the intensity of the beat at the current position (0% to 100%).

get_beat2

get the intensity of the beats from both decks at the same time.

get_beatgrid

get the intensity of the beat based on the beatgrid (100% if on the beat, 0% if halfway between to beats).

get_beatpos

get the current position in beatgrid coordinate (27.5 would mean halfway between the 27th and 28th beats in the song).

get_beatdiff

Get the distance between the beat from this deck and the beat from the active deck 50% means the deck are aligned, 0% means this deck is late half a beat, 100% means it is ahead half a beat 'get_beatdiff 4' will return the distance percentage between bars instead of beats

get_bpm

Get the bpm of the song Use 'get_bpm absolute' to get the original bpm of the song (not changing when changing the pitch)

get_firstbeat

get the position of the first beat (in milliseconds)

get_firstbeat_local

get the position of the first beat in the current phrase 16 beats (in milliseconds)

get_time

get the elapsed time (or remaining or total depending on "display_time"), in milliseconds. Use 'get time 1000' to get another unit than ms (1000=ms, 25=1/25th of seconds, 44100=frames, etc). Use "elapsed", "remain" or "total" to bypass the setting of display_time. Use "absolute" not to take the pitch into account. On texts, use "short" to hide the decimals. Example: get_time "remain" "short"

get_time_sign

Get the sign (-1 or +1) of the elapsed time (or remaining or total, depending on "display_time") You can write 'get_time_sign "elapsed"' or "remain" or "total" to bypass the setting of display_time

get_time_hour

Get the hours of the elapsed time (or remaining or total, depending on "display_time") Use 'get_time_hour "absolute"' if you don't want to take the pitch variations into account You can write 'get_time_hour "elapsed"' or "remain" or "total" to bypass the setting of display_time

get_time_min

get the minutes of the elapsed time (or remaining or total, depending on "display_time"). use 'get time_min "absolute"' if you don't want to take the pitch variations in account. you can write 'get time_min "elapsed"' or "remain" or "total" to bypass the setting of display_time

get_time_sec

get the seconds of the elapsed time (or remaining or total, depending on "display_time").

get_time_ms

get the 1/100th seconds of the elapsed time (or remaining or total, depending on "display_time") use 'get_time_ms 1000' to get the actual milliseconds

get_time_msf

get the MSF frame of the elapsed time (or remaining or total, depending on "display_time").

get_totaltime_min

get the minutes of the length of the song

get_totaltime_sec

get the seconds of the length of the song

get_totaltime_ms

get the 1/100th seconds of the length of the song

get_totaltime_msf

get the frames of the length of the song

get_rotation

get the angle of the disc

get_arm

get the position of the turntable arm

get_position

get the position in the song

get_automix

get the position of the automix crossfader

get_volume

get the volume applied by both the volume sliders and the crossfader

get_deck

get the number of the deck

get_deck_letter

get the letter of the deck

get_spectrum_band

get the level of a single spectrum band. 'get_spectrum_band 1' Use 'deck Master ' in front to get spectrum of the Master deck 'deck Master get_spectrum_band 1' By default there are 32 bands

get_plugindeck

For use in plugins. Returns 1,2,etc... when plugin is active on a deck, 0 for Master , -1 for Sampler , -2 for mic

get_defaultdeck

get the number of the default deck

get_leftdeck

get the number of the left deck

get_rightdeck

get the number of the right deck

get_activedeck

get the number of the sync Master deck

get_decks

get the total number of decks of the current skin (can also be used with argument to compare: 'get_decks 4' returns true if 'get_decks' would return 4, false otherwise)

get_custom_text

get_beat_counter

get the position of the beat counter

get_beat_num

"get_beat_num" returns a value between 1 and 4 indicating the beat in the measure "get_beat_num 1 4" returns true when the first beat of the measure is currently playing "get_beat_num 1" returns true when the first beat of a 4-beat measure is currently playing (works from 1 to 4) "get_beat_num 16" returns a percentage indicating the beat position in a 16-beat phrase (works with any phrase number larger than 4)

get_phrase_num

"get_phrase_num" returns a value between 1 and 4 indicating the measure number "get_phrase_num 1" returns true when the first measure of the phrase is currently playing

get_bar

returns the current bar number (1 bar = 4 beats)

get_beat_bar

get the position in % in the 4:4 bar (or in 4:16 if called with 'get beat_bar 16')

get_filepath

get the filepath of the song on the deck

get_filename

get_filesize

get_artist

get_title

get_title_remix

Return combination of title and Remix : "Title ( Remix )".

get_title_before_remix

Return title of the track. If Remix is empty, the part in brackets in the title is removed (and shown by get_remix_after_title)

get_remix_after_title

Return Remix of the track loaded on the deck like "( Remix )" Remix will automatically be extracted from title if Remix field is empty

get_artist_before_feat

Return artist of the track, with 'featuring' stripped

get_featuring_after_artist

Return featuring artist, stripped from artist or title field

get_artist_title_separator

Return a dash ( - ) if there is both an artist and a title

get_artist_title

get_title_artist

get_album

get_year

get_genre

get_composer

get_songlength

get the length in seconds of the song on the deck

get_comment

get_version

Returns version as text such as "2023"

get_build

Returns build number

get_membership

get_license

get_hwnd

return the Windows handle to VirtualDJ's window

get_vdj_folder

return the home folder of VirtualDJ.

get_browsed_selection_index

'get_browsed_selection 1 3' returns true if the first line is the selected line in a browser 3 lines high 'get_browsed_selection 3' returns the line number of the selected line in a browser 3 lines high (between 1 and 3)

get_browsed_folder_selection_index

'get_browsed_folder_selection 1 3' returns true if the first line is the selected line in a browser 3 lines high 'get_browsed_folder_selection 3' returns the line number of the selected line in a browser 3 lines high (between 1 and 3)

get_browsed_song

get a property from the currently browsed file: "get_browsed_song 'title'", "get browsed_song 'playcount'", etc...

browsed_song

set a property of the currently browsed file: "browsed_song 'rating' 5", ...

get_loaded_song

get a property from the song loaded on the deck: "deck 2 get_loaded_song 'album'"

loaded_song

set a property of the currently loaded file: "loaded_song 'rating' 5", ...

get_loaded_song_color

'get_loaded_song_color red 255' (component, default color) 'get_loaded_song_color white' (default color) returns color for the loaded track. This includes color filters. (For manually selected color only, use 'get_loaded_song color' instead)

prelisten_info

get_browsed_artist

get_browsed_title

get_browsed_title_artist

get_browsed_artist_title

get_browsed_album

get_browsed_composer

get_browsed_genre

get_browsed_comment

get_browsed_filepath

get the filepath of the song currently selected in the browser

get_browsed_bpm

get_browsed_color

'get_browsed_color 0 red 255' (item, component, default) 'get_browsed_color 0 white' (item, default) returns color for selected item. This includes color filters. (For manually selected color only, use 'get_browsed_song color' instead)

get_browsed_header

get_browsed_scrollpos

get_browsed_scrollsize

get_browsed_folder_scrollpos

get_browsed_folder_scrollsize

get_browsed_folder_icon

get_browsed_folder

get the name of the folder selected in the browser

get_browsed_folder_path

get the full path of the folder selected in the browser

get_browsed_folder_tab

get_browsed_key

get_record_time

get the time already spent recording

get_record_size

get the current size of the recording file

get_record_message

get the message displayed on the Record page

get_record_min

get the minutes of the recording time

get_record_sec

get the seconds of the recording time

get_record_ms

get the milliseconds of the recording time

get_record_msf

get the frames of the recording time

get_haslinein

returns true if the current soundconfig includes some linein inputs

get_hasmic

returns true if the current soundconfig includes a mic input

has_aux

returns true if the current soundconfig includes a aux input

get_hasinput

returns true if the current soundconfig includes any input (mic, linein or timecode)

get_hasheadphones (or get_hasheadphone)

True when a headphones output is configured in sound setup, or when the controller has a headphone volume control

get_hasmaster

True when a Master output is configured in sound setup, false for external mixer configurations

get_askthedj_unread

Returns the number of unread Ask The DJ requests (requires askTheDJMonitoring setting to be on always)

get_askthedj

Returns the latest request from ask the dj (requires askTheDJMonitoring setting to be on always) Use 'get_askthedj 2' to get the second latest request, etc.

get_deck_analysis

get_song_event

Provide analysis about current and coming events in the song. Can be used when writing visualisation plugins. The first parameter is "current" or "next" to get the current or the coming event. The second parameter can be "hasbeats", "volume", "volume_end", "remaining"

get_username

Karaoke

karaoke

Start or stop automatic karaoke loading and background music

karaoke_options

show the contextmenu with the karaoke options

karaoke_show

show the singer list on the video output

get_next_karaoke_song

Get info about the upcoming karaoke tracks Example 'get_next_karaoke_song "singer" +1'

get_karaoke_background_song

Get info about the background song playing in karaoke mode

is_karaoke_idle

On when karaoke mode is active but not playing. (Background music may be playing)

has_karaoke_next

On when karaoke mode is active and there is still another singer queued

is_karaoke_playing

On when karaoke track is playing and karaoke mode is active. Off when background music is playing

karaoke_venue_name

Key

key

change the key of the song, from -12 (one octave down) to +12 (one octave up), only in multiple of semitones.

get_key_modifier

get the number of semitone up or down currently applied to the song

get_key_modifier_text

get the number of semitone up or down currently applied to the song

get_harmonic

get_key

get the key of the current song, based on keyDisplay option Use get_key "musical" or get_key "harmonic" to get a specific display independent of keyDisplay option

key_smooth

change the key of the song, from -6 (half octave down) to +6 (half octave up), allowing not only multiple of semitones. use key_smooth full for full octave up or down

key_move

move the key up or down from the given amount of semitones.

set_key

change the key of the song to match the given key. you can use standard notation ('set_key "A#m"') or numeric ('set key "03A"'). if no given key, it will use the other deck. the change will match the exact key.

match_key

change the key of the song to match the given key. you can use standard notation ('match_key "A#m"') or numeric ('match_key "03A"'). if no given key, it will use the other deck. the change will be the smallest change to make it compatible with the given key.

key_match_button

Match key to the other deck's key on first press, or reset key to normal on second press

key_match_menu

Open a menu to select a different key for the current song

get_key_color

Return color of the current key of the track in the specified deck

key_lock (or keylock)

activate/deactivate the key lock (to make the pitch slider change the speed of the song, but keep the key of the song like it is now).

keycue_pad_jump

when on, keycue_pad will jump to the cue point on each press, when off, keycue_pad will only modify the key without jumping to the cue point

keycue_pad

change the key depending on the pad and play the current cue point

keycue_pad_color

green for the selected key, magenta for lower keys, orange for higher keys and white for no key change

keycue_pad_page

change the offset of the key change by keycue_pad actions

Loop

loop

set or remove a loop. 'loop 4', 'loop 0.5' set a loop in beats. 'loop 10ms' set a loop in ms. 'loop 200%' multiply by 2 the size of the loop. 'loop 50%' divides by 2. 'loop' alone set a loop at the actual position with the same beat size as the last set loop.

get_loop_in_time

Get time (in ms) of the start of the loop Use "get_loop_in_time 1.0" to return the time in seconds instead of milliseconds Use "get_loop_in_time on" to return the loop in time even when no loop is active

get_loop_out_time

Get time (in ms) of the end of the loop Use "get_loop_out_time 1.0" to return the time in seconds instead of milliseconds Use "get_loop_out_time on" to return the loop out time even when no loop is active

loop_button

one-button smart loop: Set the loop in on the first press, set the loop out on second press, remove the loop on third press.

loop_in

if not in loop, set the beginning of a loop. if in loop, jump back to the beginning of the loop.

loop_out

if not in loop, set the deck in loop, starting from the last set loop_in point or stutter point. if in loop, exit the loop.

pioneer_loop_in

pioneer_loop_out

pioneer_loop

loop_length

change the length of the loop. 'loop_length 15ms' set the length in ms, 'loop_length 0.5' set the length in beats, 'loop_length +100%' set the length in percentage of the actual length.

loop_move

move the loop without changing its length. 'loop_move +10ms' set the distance in ms, 'loop_move +2' set the distance in beats, 'loop_move +50%' set the distance in percentage of the actual length.

loop_double

doubles the length of the loop.

loop_half

halves the length of the loop.

loop_exit

remove the loop.

loop_select

set the loop size (or default loop size if no loop is active). If no parameter is provided, a popup list of loop values to choose from will be displayed.

reloop

jump to the loop_in point.

reloop_exit

if in loop, remove the loop. otherwise, reactivate the last used loop. Highlights when a loop had been used

loop_position

Get relative position in loop (from 0% to 100%)

get_active_loop

get the number of beats in the current loop

get_loop

get the number of beats in the current loop or the default loop size if no loop is active

loop_save

'loop_save 1' Save current loop in saved loop slot 1 'loop_save "myloop"' Save current loop and name it "myloop"

loop_load

'loop_load 1' Load the saved loop from slot 1 'loop_load "myloop"' Load saved loop named "myloop"

loop_load_prepare

'loop_load_prepare 1' Activate/Deactivate the saved loop in slot 1 without jumping to the start point 'loop_load_prepare "myloop"' Activate/Deactivate stored loop named "myloop" without jumping to the start point

loop_delete

'loop_delete 1' Delete the saved loop in slot 1

saved_loop

'saved_loop 1' Load the saved loop in slot 1 or set if it doesn't exist 'saved_loop "myloop"' Load saved loop named "myloop" or set if it doesn't exist

saved_loop_prepare

'saved_loop_prepare 1' Activate/Deactivate the saved loop in slot 1 without jumping to the start point or set if it doesn't exist 'saved_loop_prepare "myloop"' Activate/Deactivate stored loop named "myloop" without jumping to the start point or set if it doesn't exist

get_saved_loop

get information about a saved loop: get_saved_loop 'pos', get_saved_loop 'length', get_saved_loop 'name'

saved_loop_display

Show information about a saved loop based on the savedLoopDisplay config option. Example: 'saved_loop_display 1' Can also be used to modify the savedLoopDisplay option by using +1 or -1 as parameter: 'saved_loop_display +1'

saved_loop_autotrigger

'saved_loop_autotrigger 1' Activate/Deactivate auto-trigger of loop when the play position arrives at the saved loop

loop_color

query or set the color of a saved loop Query example: loop_color 1 Set example: loop_color 1 'yellow'

loop_back

When loop back mode is enabled, starting a loop Sets the end point of the loop, looping what you just heard. When disabled, starting a loop Sets the start point of the loop.

loop_roll_mode

If loop roll mode is active, when the loop exits, the song continues from the position it should have been if no looping had been done

loop_roll

"loop_roll 0.25" for 1/4th beat loop roll "loop_roll video" to toggle video loop roll on or off

slicer

"slicer 1" to "slicer 8" for 8 slicer buttons "slicer 1 'hold'" to hold the current position on first activate "slicer 'length' +1" to increase length "slicer 'step' +1" to increase step size "slicer video" to toggle video slicer on or off

repeat_song

When active, song will restart from beginning when finished

loop_adjust

use the jogwheel to adjust the loop. loop_adjust 'move', loop_adjust 'out', loop_adjust 'in' activate a specific loop adjust mode loop_adjust -1, loop_adjust +1 emulate moving the jog when loop adjust is active

loop_pad

Use 'loop_pad 1' to 'loop_pad 8' to trigger a loop of predefined length, depending on loop_pad_page and loop_pad_mode

loop_pad_page

Cycle through the different lengths of Loops for use with loop_pad

loop_pad_mode

Cycle through the different loop modes for use with loop_pad. 1=On/Off 2=Hold 3=Roll

loop_options

Show some options about Loops

Macro

macro_record

Start or stop recording a macro

macro_play

playback a previously recorded macro

Pads

pad

activate the ith pad from the current pad page

pad_page (or pad_pages)

Syntax: 'pad_page 1' to activate a the first page, 'pad_page 1 hotcues' to override the default for a page, 'pad_page btn1' for first button (that could be page 1 or page 5 depending on shift), 'pad_page' to show the dropdown menu

pad_page_select (or pad_page_favorite_select)

Select the pad page for this slot

pad_edit

edit the current Pads page

pad_param

change the param 1 of the Pads

pad_param2

change the param 2 of the Pads

pad_pressure

change the pressure applied on the ith pad

pad_color

return the color of the ith pad (without auto-dim)

pad_button_color

returns the color of the ith pad as should be used on a controller button (changing the color for standby/active/pressed according to the controller's RGB capability). if the pad is active and has no color, white is returned. if the pad is inactive and has a color, and the controller support full RGB Pads , a dimmed color is returned. if the pad is active and has a color, and the controller doesn't support full RGB Pads , the color is blinking.

padshift

the 'pad' action automatically change action on shift, but if you want to manually force the use of the shift action, you can use padshift instead

padshift_pressure

the 'pad_pressure' action automatically change action on shift, but if you want to manually force the use of the shift action, you can use padshift_pressure instead

padshift_button_color

the 'pad_button_color' action automatically change action on shift, but if you want to manually force the use of the shift action, you can use padshift_button_color instead

pad_pushed

returns true if the pad is pushed (useful for custom color actions not using auto-dim)

pad_menu

open the menu for this pad page

pad_has_param

pad_param_visible

pad_has_action

pad_has_pressure

pad_has_color

pad_has_menu

pad_has_16pads

Returns true when a controller is connected with a 4x4 pad layout

pad_bank2

Switch between showing Pads 1-8 or 9-16 on skins that support it

padfx

Activate/deactivate named effect with a single key. Effect parameters can be specified as well. 'padfx "echo" 40% 90%' to start/stop the echo effect with first parameter at 40% and second parameter at 90%. When the effect is stopped, the parameters return to their original values. 'padfx "echo" 40% 90% smart_pressed' smart_pressed works as a toggle when pressing the button shortly, or as a temporary while holding the button pressed 'padfx "echo" 40% 90% "TRAIL:on"' after the sliders, it is possible to add strings to disable or enable switch parameters by defining their name, a colon and "on" to enable or "off" to disable 'padfx "echo out" 80% "solostem:vocal"' as the last parameter, you can add solostem:stemname to only let that stem be audible while applying the effect. stem names can be Vocal,HiHat,Bass,Instru,Kick,Melody,Rhythm,MeloVocal,MeloRhythm 'padfx "echo out" "mutestem:rhythm"' as the last parameter, you can add mutestem:stemname to mute that stem while applying the effect 'padfx "reverb" "stemfx:vocal"' as the last parameter, you can add stemfx:stemname to apply the effect only to that stem (other Stems will continue playing normally). stem names can be vocals, hihat, bass, instru, kick, rhythm and instrumental

padfx_single

Same as padfx, but turns off the previous padfx before activating the current effect

Pitch

pitch (or pitch2 or pitch2_slider or pitch_slider)

Set the pitch of the deck. Without parameters it can be assigned to sliders Used with a number, it gives the position on the slider (and therefore account for pitch_range). ('pitch 0.25' set pitch at -10% if pitch range is 20%) Used with a percent it gives an absolute position. 'pitch 112%' set pitch at +12% Relative values are possible too. 'pitch +0.1%', 'pitch +0.1 bpm'

pitch_motorized

pitch_relative

set the pitch of the deck, to be used by hardware controllers if you prefer the change to be relative to the software pitch position

pitch_zero

Set pitch to 0% (normal playing speed) Use 'pitch_zero "center"' on controllers that send a message when the pitch slider is at the center. This prevents unwanted behavior in gradual or relative mode.

pitch_reset

Slowly brings the pitch back to 0%. You can specify the speed in % per second (default uses the pitchResetSpeed option): 'pitch_reset 5%' You can also specify the speed in ms or beats: 'pitch_reset 500ms' or 'pitch_reset 4bt'

pitch_range

set the range for the pitch slider. 'pitch_range 12%' set the range from -12% to +12%. 'pitch_range +1' scrolls through the default pitch ranges. 'pitch_range "12,16,25" +1' scrolls through the provided list of pitch ranges. 'pitch_range +1 deck' changes the pitch range only for the specific deck

pitch_bend

slow down or speed up the song: 'pitch_bend +3%'. you can make the bend to increase slowly by specifying a second time parameter: 'pitch_bend +1% 500ms' will start at +1% and will double every 500ms.

master_tempo

activate/deactivate the Master tempo (to make the pitch slider change the speed of the song, but keep the original key of the song).

pitch_lock (or pitchlock)

when Pitch Lock is on, moving the pitch slider on one deck will move the slider on the other deck to keep the sync

startupspeed

vinyl startup speed, the larger, the longer it takes for the Record to get from stopped to playing

backspin

Do a backspin. It is possible to specify the length: 'backspin 5000ms' or 'backspin 4bt'

brakespeed

vinyl brake speed, the larger, the longer it takes for the Record to get from playing to stopped

get_pitch

Get the pitch from -100% to +100%, centered on 0%

get_pitch_value

Get the pitch from 0% to 200%, centered on 100%

get_pitch_zero

Is true if the pitch is zero, with an optional precision parameter: 'get pitch_zero 5%' (the % is relative to the pitch range. Use "get pitch_zero 'absolute' 0.1%" to use absolute precision)

Plugins

effect_select_multi

effect_select_multi 2 "echo" -> select effect echo in slot 2 effect_select_multi 1 -1 -> select previous effect in slot 1 effect_select_multi +1 -> select next effect in slot 1 effect_select_multi -> show popup window for slot 1 effect_select_multi 1 -> show popup window for slot 1 effect_select_multi 1 0.2 -> select the 2/10th effect from the list in slot 1 effect_select_multi "video" -> select effect in the video effect slot effect_select_multi does not deactivate the previous plugin in the specified slot

effect_select

effect_select 2 "echo" -> select effect echo in slot 2 effect_select 1 -1 -> select previous effect in slot 1 effect_select +1 -> select next effect in slot 1 effect_select -> show popup window for slot 1 effect_select 1 -> show popup window for slot 1 effect_select 1 0.2 -> select the 2/10th effect from the list in slot 1 effect_select "audioonlyvisualisation" -> select visualisation used when song has no video effect_select deactivates the previous plugin in the specified slot

effect_select_toggle

Same as effect_select, but will turn on the new effect if the previous effect was on

effect_select_popup

Same as effect_select, but shows the selection drop-down temporarily for easier selection

effect_active (or effect_activate)

activate/deactivate the effect on a specific slot. example: effect_active 1 'flanger' on or effect_active 1

effect_disable_all

'deck 1 effect_disable_all' Disables all effects on deck 1 'deck Master effect_disable_all' Disables all Master effects 'effect_disable_all Sampler ' Disables all Sampler effects. 'aux' or 'mic' can be used for mic or aux effects

effect_slider (or effect_slider_slider)

Move the n-th slider on the given effect "effect_slider 1 2 50%" : Set slider id 2 on slot 1 to 50% "effect_slider 1 0%" : set slider id 1 on slot 1 to 0%

effect_slider_skip_length

Move the n-th slider on the given effect, excluding a length slider if present "effect_slider 1 2 50%" : Set slider id 2 on slot 1 to 50% "effect_slider 1 0%" : set slider id 1 on slot 1 to 0%

effect_slider_active (or effect_slider_activate)

move a slider and activate the effect as long as the mouse is down

effect_has_slider

effect_has_slider 1 2 on -> returns true if there is a second slider on slot 1 effect_has_slider 1 -> returns true if there is a first slider on slot 0

effect_slider_reset

return this plugin slider to its default value

effect_colorfx

'effect_colorfx 1 "echo"' to use echo on custom color fx slot 1 (up to 4 custom slots available)

effect_colorslider

Control the effect from center position off, to full on either left or right

effect_releaseslider

Control the effect release specific slider

effect_releaseslider_active

Control the effect release specific slider and auto activate the effect

effect_button

'effect_button 1 2' button 2 on slot 1 'effect_button 2' button 2 on slot 1

effect_has_button

'effect_has_slider 1 2 on' -> returns true if there is a second button on slot 1

video_source

activate video if not active yet, and open the shader selection dialog if shader is the source

video_source_select

select the plugin used for video source. you can specify by name ('video_source_select "webcam"'), relative ('video_source_select +1') or without parameters to open a popup window listing the available plugins

video_transition_select

select the plugin used for video transitions. you can specify by name ('video_transition_select "my_plugin"'), relative ('video_transition_select +1') or without parameters to open a popup window listing the available plugins

video_transition_slider (or video_transition_slider_slider)

move the n-th slider of the video transition plugin

video_transition_button

push the n-th button of the video transition plugin

video_fx_select

select a video effect plugin. you can specify by name ('video_fx_select "my_plugin"'), relative ('video_fx_select +1') or without parameters to open a popup window listing the available plugins

video_fx_clear

deactivate all the active video effects

video_fx

activate/deactivate the selected video effect

get_video_fx_slider_label

get the text to display under this slider control

video_fx_slider (or video_fx_slider_slider)

move the n-th slider of the video effect plugin

video_fx_button

push the n-th button of the video effect plugin

effects_used

Active when there are any effects activated. Use "effects_used 'deck'" to get the effects on the selected deck, or "effects_used ' Master '" to get effects activated on Master .

get_effects_used

Returns the number of effects currently active

get_effect_name

get the name of the currently selected effect

get_effect_title

get the title of the currently selected effect

get_effect_string (or effect_string)

get the text displayed by this effect. Some effects allow setting text as well

get_effect_string_name

get the label to display for this effect

get_effect_button_name

get the name of the xth button of the currently selected effect

get_effect_button_shortname

get the short name of the xth button of the currently selected effect

get_effect_button_count

get the number of buttons on this effect

get_effect_slider_count

get the number of slider on this effect

get_effect_slider_name

get the name of the xth slider of the currently selected effect

get_effect_slider_shortname

get the shortname to display under this slider control

get_effect_slider_label

get the label to display under this slider control

get_effect_slider_label_full

get the label to display under this slider control

get_effect_slider_text

get the full text associated with this slider control

get_effect_slider_default

returns the default value for this slider

get_videofx_name

get the name of the currently selected video effect

get_videotrans_name

get the name of the currently selected video transition

effect_show_gui

show the control window for this effect

effect_dock_gui

dock/undock this effect's control window

pluginsongpos

show_pluginpage

show or hide the plugin control windows in the browser area

effect_command

send a command to this effect

effect_beats

set the beat parameter for certain effects

effect_beats_all

set the beat parameter for 1, 3 or 6 slots depending on skin6FxLayout and skin3FxLayout settings

effect_has_beats

effect_has_length

is_releasefx

query if this effect is in the release effect slot

effect_3slots_layout

Change between the 1-slot and 3-slots layout for effects

effect_clone

Load into this deck all 3 slots from the current left or right deck

effect_mixfx

Associate an effect with the crossfader

effect_mixfx_activate

Toggle mix fx on or off. Use effect_mixfx_select to select

effect_mixfx_select

Select the mix fx when moving the crossfader

effect_bank_save

save the effects in deck fx slots 1 to 6 to the bank specified by the parameter

effect_bank_load

load the effects in deck fx slots 1 to 6 from the bank specified by the parameter

get_nb_multicam

effect_stems_color

Get the color for the effect_stems button

effect_stems

Apply effects only to the selected Stems . 'effect_stems vocal on' Stems are Vocal,HiHat,Bass,Instru,Kick,Melody,Rhythm,MeloVocal or MeloRhythm

Poi

beat_tap

tap on a few beats to set a new bpm for the song if the application didn't got it right on the first time.

edit_poi

open the POI Editor to edit the cue points, and other points of interest

edit_bpm

open the BPM Editor to edit the bpm and beat grid

adjust_cbg

adjust the beat grid. 'adjust_cbg +2' moves the start bar from 4:4. 'adjust_cbg +10%' moves the actual bars.

set_bpm

set the bpm of the song to the set value: 'set_bpm 129.3', or relative to the actual value: 'set_bpm 50%'.

goto_mixpoint

Jump to the specified mix point ("StartTempo", "EndTempo", "StartCut", "EndCut", "StartFade", "EndFade", "StartSound", "EndSound") Example: goto_mixpoint "StartCut"

set_mixpoint

Move the specified mix point to the current position ("StartTempo", "EndTempo", "StartCut", "EndCut", "StartFade", "EndFade", "StartSound", "EndSound") Example: set_mixpoint "StartTempo"

set_loadpoint

Set the point where the track will start when loaded

set_firstbeat

moves the first beat to the current position, adjusting the beat-grid

reanalyze

reanalyze bpm etc... for the file loaded on the deck 'reanalyze multi' can be used to scan for multiple bpm's

Prelisten

prelisten (or preview)

Pre-listen the selected track

prelisten_output

Set this deck to be used for the prelisten player Example: "deck 1 prelisten_output", or to put it back to default: "prelisten_output 'auto'"

prelisten_options

Show a context menu with the prelisten player options

prelisten_pos

move the position of the prelisten player

prelisten_stop

Stop the prelisten player

Record

start recording the session.

record_cut

cut the current recording to a new file (or new track if recording to CD)

record_config

open the Record configuration panel

record_vu

show the volume of what's being recorded

broadcast

start or stop to broadcast Optionally add parameter to specify "video", "direct", "server" or "podcast". Without parameters it will use the last used mode.

broadcast_message

set or get the broadcast message.

Sampler

sampler_play

play the selected sample. syntax 'sampler_play' plays the default sample. 'sampler_play 4' plays the fourth sample.

sampler_play_stutter

play the selected sample. if already playing, restart from begining.

sampler_play_stop

play the selected sample if it's not already playing, or stop it if it's already playing.

sampler_stop

stop the selected sample. syntax 'sampler_stop' stops the default sample. 'sampler_stop 4' stops the fourth Sampler slot. 'sampler_stop all' stops all samples.

sampler_pad

'sampler_pad 1' triggers the sample in slot 1, based on the play mode for that sample slot

sampler_loaded

'sampler_loaded 1' returns true when there is a sample loaded in slot 1, otherwise returns false

sampler_color

get the color of the sample on this slot if it has one

sampler_select (or sampler_default)

select which sample is the default Sampler slot for that deck. syntax ' Sampler select 5' selects the fifth Sampler slot. ' Sampler select +1' scrolls through the Sampler slots. ' Sampler select' open a popup menu to select the new default Sampler slot.

sampler_position

get the current position of the sample

sampler_bank

Select a new Sampler bank. Can be called either by name (sampler_bank "birthday"), by number (sampler_bank 2) or can be assigned to a rotary knob (sampler_bank) or buttons (sampler_bank +1)

sampler_mute

mute/unmute this sample

sampler_edit

edit the given sample in the SampleEditor

sampler_mode (or sampler_rapidfire)

set the global trigger mode for the Sampler : "sampler_mode 'on/off'", 'hold', 'stutter' or 'unmute' set trigger mode for a specific sample: "sampler_mode 1 'on/off'" to set sample 1 mode or "sampler_mode 1 +1" to cycle

sampler_output

Select Sampler output channel. 'deck Master sampler_output', 'sampler_output "headphones"', 'deck 1 sampler_output', 'sampler_output "popup"'

sampler_options

popup the sample menu.

sampler_volume_master

'sampler_volume_master' Sets the Master volume of the Sampler

sampler_pfl

Select if the Sampler is sent to the headphones. (can be used with a slider or a % to specify the volume: 'sampler_pfl 75%')

sampler_volume

'sampler_volume' Sets the volume of the sample that has the focus, on the selected deck. 'sampler_volume 1' Sets the volume of the sample in slot 1 in the current bank. 'sampler_volume "siren"' Sets the volume of the sample 'siren.vdjsample'.

sampler_velocity

sampler_volume_nogroup

Sets the volume of the sample without changing the volume of other samples in the same group

sampler_group_volume

change the volume of all the samples in the give group. You can specify the group by name, or by group index

sampler_group_color

get the color of a Sampler group

sampler_group_name

get the name of a Sampler group

sampler_group_mute

mute/unmute a sample group. You can specify the group by name, or by group index

sampler_has_group

returns true if the specified group (specified by name or by index) exists in the current samplebank

scratchbank_edit

scratchbank_load

scratchbank_assign

scratchbank_load_to_deck

scratchbank_unload (or sampler_unload_from_deck)

Unload the song previously loaded using scratchbank_load_to_deck from deck and load back the last song

sampler_load_to_deck

Load the sample from the selected slot to the deck

sampler_rec

On first press, start to Record a new sample. On second press, stop to Record Use 'sampler_rec "mic"' to Record a sample from microphone, or 'sampler_rec " Master "' to Record from Master output If the deck is on loop, a loop sample will immediately be created. If the deck is playing, it will Record what's playing until the stop. If the deck is paused, it Sets the 'entry point', and the second push will set the 'exit point' and use the deck's file between those two points. 'sampler_rec 1' or 'sampler_rec 1 "mic"' will store the sample in the first slot of the " Record " sample bank, so that it can be used immediately after recording

sampler_start_rec

start to Record (from the deck, or from mic or Master if specified) in order to create a new sample file

sampler_stop_rec

stop the recording and save the result in a sample file

sampler_abort_rec

cancel the recording and delete the sample file

sampler_rec_delete

delete a recording from the "Recordings Bank" "sampler_rec_delete 3" would delete the sample previously recorded using "sampler_rec 3"

sampler_loop

use 'sampler_loop -1' or 'sampler_loop +1' to change the length of a playing sample use 'sampler_loop "current" 1' to set the sample to loop for 1 beat or 'sampler_loop 1 1' to set sample 1 to 1 beat loop use 'sampler_loop "current" 0.5 "play" while_pressed' to loop the sample as long as long as the button is pressed for 0.5 beats

sampler_used (or get_sampler_used)

check if a sample is playing (or if used with 'sampler_used 4' check if exactly 4 samples are playing)

get_sampler_slot

get the number of the Sampler slot that currently has the focus

get_sampler_count

get the number of slots in the current Sampler bank

get_sample_name (or get_sample_slot_name)

get the name of the specified sample

get_sample_info

get additional information about the sample, such as 'get_sample_info 1 fullpath' In addition to the regular column names, 'group' is also supported, and 'length' returns beat values for Loops

get_sampler_bank

get the name of the currently loaded Sampler bank

get_sampler_bank_id

get the number of the currently loaded Sampler bank

get_sampler_bank_count

get the number of sample banks

get_sample_color

get the color for the specified sample (with auto-dim)

Sandbox

sandbox

activate/deactivate sandbox mode. in sandbox mode, the Master output continues to play what it was playing without being affected by your actions, and you can move both decks to whatever position you want, in order to prelisten your upcomming mix.

can_sandbox

returns true if virtualdj can be sandboxed. sandbox cannot be activated while you have effects or samples active, or video, or if you're scratching, or if you have more than one deck playing with the volume up.

Sync

sync

smoothly synchronize the song with the other deck.

is_sync

on when tracks are synchronized (bpm and phase while playing, bpm when not playing)

match_bpm

set the pitch to match the BPM of the other deck.

match_gain

set the gain to match the other deck.

play_sync

play the song instantly synchronized with the other deck.

play_onbeat

instantly synchronize the song with the other deck, using local beat information instead of the global beatgrid, but don't change the pitch.

play_sync_onbeat (or sync_nocbg)

instantly synchronize the song with the other deck, using local beat information instead of the global beatgrid.

beatlock

When beatlock is activated, the songs are kept synchronized, even when moving the pitch, scratching, etc...

smart_fader

When smart fader is activated, songs are synchronized while using the crossfader, and the tempo moves toward the tempo of the song that is being faded into

auto_bpm_transition

When pressed, the bpm of the song is gradually moved to the bpm of the other deck while keeping both songs at the same bpm When smartPlay or autoBPMMatch are on, it will move to the bpm of the other deck at normal speed When using parameter 'source_original', 'target_original' or 'target_current' you can force which bpm it will transition to

auto_bpm_transition_options

Enable/Disable certain features of the auto_bpm_transition. First parameter can be 'length', 'loop', ' Stems ', 'master_tempo', 'autostart' When selecting Stems to disable, use 'auto_bpm_transition_options Stems vocal' for example

get_bpm_match

Returns 0.5 when bpm's are synchronized

auto_sync_settings

Set some pre-defined values for the main automatic sync settings (auto match bpm, auto match key, auto sync, auto pitch lock) depending on the skin category

sync_hint

sync_hint 'pitch' returns true if the pitch should be matched. Then sync_hint 'phase' returns true if the phase should be synced

phrase_sync

shift by a number of beat to match the phrase of the other deck (default 4:4, but can specify 'phrase_sync 16' for example)

quantize_all

Set all quantize options

Text

get_text

get some text. You can use the inverted apostrophe to query VDJScript results within the text: "get text 'You are listening to `get loaded_song "title"` at `volume` volume.".\nVDJScript returning booleans (buttons) will be displayed as "on" or "off".\nVDJScript returning values (sliders) will be displayed as a percentage.\n(you can also (but it's being deprecated in VDJ7) use % shortcuts for some common queries: "get text 'you are listening to %title by %author'")

get_status

get information about background tasks

stopwatch

stopwatch_reset

countdown

Count down to a specific date or time. Example: countdown '2023/01/01 00:00' Second parameter can be used to optionally format the return value. Use %full, %HH, %MM, %SS, %DD

Timecode

timecode_active

Select if the deck is controlled by a timecode signal. (note: You can use 'timecode_active x' where x is the turntable number, to assign the same turntable to control several decks at once: 'deck 1 timecode_active 1 on & deck 2 timecode_active 1 on')

invert_timecode

Invert timecode control (for 1 timecode source, switch it through available decks, for 2 timecode sources, from 1 to 3, 2 to 4)

timecode_mode

Set the timecode mode: 'smart', 'absolute', 'relative'.

timecode_config

Open the timecode config window

timecode_bypass

Use the timecode turntable as linein input

timecode_reset_pitch

Reset the "software" pitch to 100%, so that the deck pitch matches the turntable pitch exactly, and needle-drop is truly absolute

timecode_pitch

For controllers that send the pitch through midi, let the timecode engine know the pitch slider's position

get_hastimecode

returns true if the current soundconfig includes some timecode inputs

get_timecode_quality

timecode_cd_mode

Force timecode to CD mode (use when using a vinyl timecode on a cd or other digital device)

timecode_motor_enable

Hybrid turntables that send midi messages to indicate if motor is enabled can use this

timecode_options

Show some timecode options

Video

leftvideo

assign this deck to the left of the video crossfader: "deck 3 leftvideo" or "leftvideo +1" or "leftvideo 'auto'".

rightvideo

assign this deck to the right of the video crossfader: "deck 3 rightvideo" or "rightvideo +1" or "rightvideo 'auto'".

leftvideo_button

simple button to control the left video source: "deck 3 leftvideo_button".

rightvideo_button

simple button to control the right video source: "deck 3 rightvideo_button".

is_video

return true if this deck has some video

is_audioonlyvisualisation

return true if this deck has the audio only visualisation running on it

has_video_mix

return true if video output is using transition and video-crossfader with one or more video sources, false if it's playing audio-only and using a source plugin

over_video (or overvideo)

force this deck's video output on the video Master

video_crossfader_link

link or unlink the video crossfader to the audio crossfader

video_crossfader_auto

move the video crossfader automatically according to which side is playing, cueing, scratching, etc...

video

open or close the video window

video_output

Show menu to select on which monitor to open the video output. You can also specify a specific output: "video_output 1" to open video output on the first monitor To just show or hide the output use "video_output on" or "video_output off". To toggle output, use "video_output ? video_output off : video_output on"

video_crossfader

set the video crossfader

video_fadetoblack

activate/deactivate fade-to-black on volume sliders

video_transition

Launch a transition from one video deck to the other. You can specify the duration of the transition: 'video_transition 1000ms' You can specify the direction of the transition: 'video_transition "left"' or 'video_transition "left" 1000ms' You can specify the location to transition to using a percentage (or assign it to a slider): 'video_transition 50%' or 'video_transition 1000ms 50%'

video_delay

set a delay between video or audio to synchronize output (in milliseconds) Use "video_delay +100ms" or "video_delay -100ms" to increase or decrease the delay, or "video_delay 0ms" to reset it Use "video_delay +100" or "video_delay -100" to set it to exactly the specified amount

video_level

fade-to-black independent slider for the left or right video deck

User Manual