Dj_john24
I noticed there are a few slider controls in the options menu for the platter. Does anyone know the best settings for the Denon DN-HS5500's.
Mensajes Sat 29 Aug 09 @ 8:37 pm
Caliente123
There are many post about denon controllers.. http://www.virtualdj.com/forums/110440/Hardware_Technical_Support/Denon_Controllers_-_V6.html
Mensajes Sat 29 Aug 09 @ 10:50 pm
cstoll
Scratch - 130-140%, CUE 100%, Bend 80-90%
Mensajes Sun 30 Aug 09 @ 2:26 am
Dj_john24
Thanks cstoll.
Mensajes Sun 30 Aug 09 @ 7:55 am
Dj_john24
I've tried the settings Cstoll recomended above, but I still get alot of cue slippage when scratching. I'm using 2 5500's. Both of them have the jog trans at 3ms. I'm using Windows XP. What else can I try?
Mensajes Thu 03 Sep 09 @ 8:43 pm
cstoll
Then continue to adjust the Scratch Sensitivity ... I just gave you a starting point ...
Mensajes Thu 03 Sep 09 @ 8:48 pm
Dj_john24
Should I go higher in percentage?
Mensajes Fri 04 Sep 09 @ 5:33 am
cstoll
tight to loose = higher to lower = thick to fluid
higher means you have to work harder at moving the platter to move the track
lower means lesser movement of the platter to move the track
I hope that helps ... depends on the direction of 'slippage' ... if when bringing it back to the CUE point it doesn't quite get there all the time .. then I would say maybe move it lower - 110-120ish ... if it is goint past the cue point then maybe up the value - 140-150
higher means you have to work harder at moving the platter to move the track
lower means lesser movement of the platter to move the track
I hope that helps ... depends on the direction of 'slippage' ... if when bringing it back to the CUE point it doesn't quite get there all the time .. then I would say maybe move it lower - 110-120ish ... if it is goint past the cue point then maybe up the value - 140-150
Mensajes Fri 04 Sep 09 @ 7:56 am
Dj_john24
Hi Cstoll,
When scratching and bringing the platter back, it goes past the point. I followed your instructions to raise the percentage up. I ended up at max on the slider in the options menu. The platter reacts the same. It feels to me that the slider isn't doing anything to change the feel of the platter.
When scratching and bringing the platter back, it goes past the point. I followed your instructions to raise the percentage up. I ended up at max on the slider in the options menu. The platter reacts the same. It feels to me that the slider isn't doing anything to change the feel of the platter.
Mensajes Sat 05 Sep 09 @ 8:02 am
cstoll
Are you changing the slider and not closing the config before testing ?
Mensajes Sat 05 Sep 09 @ 10:18 am
Dj_john24
I'm closing the config menu, them I reload the track and the feel on the platter is the same.
Mensajes Sat 05 Sep 09 @ 11:34 am
Dj_john24
bump.
Mensajes Sun 06 Sep 09 @ 12:03 pm
Dj_john24
Still having issues with the platter in Virtual 6.0.2
My operating system is XP and I have My jog trans set to 3ms.
When I have both jogs in scratch mode so they both spin, while playing 2 songs, if I try to scratch one of them I get heavy drifting.
My operating system is XP and I have My jog trans set to 3ms.
When I have both jogs in scratch mode so they both spin, while playing 2 songs, if I try to scratch one of them I get heavy drifting.
Mensajes Mon 02 Nov 09 @ 7:01 pm
DJ SUGAR
Dj_john24 wrote :
Still having issues with the platter in Virtual 6.0.2
My operating system is XP and I have My jog trans set to 3ms.
When I have both jogs in scratch mode so they both spin, while playing 2 songs, if I try to scratch one of them I get heavy drifting.
My operating system is XP and I have My jog trans set to 3ms.
When I have both jogs in scratch mode so they both spin, while playing 2 songs, if I try to scratch one of them I get heavy drifting.
Dude do urself a favor an get a sl3 box and problem is solve
Mensajes Tue 03 Nov 09 @ 12:27 am
Dj_john24
Dude, I'm using a RME Fireface 400 which is 10 times better.
Mensajes Tue 03 Nov 09 @ 8:51 am
jpboggis
DJ SUGAR wrote :
Dude do urself a favor an get a sl3 box and problem is solve
Rane SL3 is not currently compatible with VirtualDJ and other DJ software - It has no ASIO (PC) or Core Audio (Mac) drivers available, so will only work with Serato.
Rane SL1 is supported by VirtualDJ on Windows PC only (No Core Audio drivers for Mac.)
A good 4-in/4-out card for timecode use with VirtualDJ is the Native Instruments Audio 4 DJ (Or 8 DJ)
Mensajes Tue 03 Nov 09 @ 12:32 pm
Dj_john24
We're going off topic here. I have a very good sound card (RME Fireface 400). I'm not running the Denon 5500's in timecode. I'm using them in usb mode with Virtual. The problem is I've tried all the settings Cstoll recommended but I still get heavy drifting when scratching while both players are spinning. It's not as bad when scratching while the other player is not spinning.
Mensajes Tue 03 Nov 09 @ 5:06 pm
Dj_john24
Is anybody else using the Denon 5500's in midi mode with no problems?
If so, what are your settings?
If so, what are your settings?
Mensajes Tue 03 Nov 09 @ 5:55 pm
Dj_john24
I guess not.
Mensajes Thu 05 Nov 09 @ 12:26 pm
cstoll
John,
Are both decks on Layer 1 ? The right deck should be on Layer 2 .
Are both decks on Layer 1 ? The right deck should be on Layer 2 .
Mensajes Thu 05 Nov 09 @ 1:12 pm
