SOFTWARE CONTROLS

KEY

ACTION

SHIFT (SECONDARY) ACTION

S *SHIFT

Hold this button down to access secondary actions as described in the SHIFT ACTION column.

P **PROG SELECT

Use this encoder to select a Program (1-20). By default the unit initializes with Program 16 which is named as VirtualDJ and is pre-assigned with VirtualDJ actions. Push the encoder to load the selected Program. See Advanced Setup for further details related to the other Programs

M1 **PAD BANK

Cycles through the 4 available modes for the 16 Pads . Sampler mode (LED A is turned on), Effects mode (LED B is turned on) , Pads mode (both LED C is turned on and Transport mode (LED D is turned on)

M2 **CTRL BANK

Cycles through the 3 available modes for the 4 CTRL knobs, the 4 Faders and the 4 buttons.
Sampler mode (LED A is turned on), Effects mode (LED B is turned on) and Pads mode (LED C is turned on)

1 Pads 1-16

The 16 Pads offer different functionality depending on the selected Pads MODE. See Pads

2 STOP

If playing, stops the selected Deck to the previously used Cue point. If paused, Sets the current position as a Temporary Cue point

3 PLAY

Plays/pauses selected Deck

4 REC

Starts/stops recording your mix

5 *BUT 1/8

Selects Left Deck

6 *BUT 1/16

Selects Right Deck

7 *BUT 1/32

Smart Mix between Left and Right Decks

8 *FADER 1

Adjust the Pitch of the Left Deck

9 *FADER 2

Adjust the Volume of the Left Deck

10 *FADER 3

Adjust the Volume of the Right Deck

11 *FADER 4

Adjust the Pitch of the Right Deck

12 CTRL 1

In Sampler mode : Select the previous/next available Sampler Bank

In Effects mode : Adjust the 1st Parameter of the selected Effect on Left Deck.

In Pads mode :Select the previous/next available page for the VirtualDJ Pads on the Left Deck.

In Single Effects mode : Adjust the 3rd Parameter of the selected Effect on Left Deck.
In Multi Effects mode : Adjust the 2nd Parameter of the selected FX1 Effect Slot on Left Deck.

In all other modes the Encoders offer the same functionality as without SHIFT

13 CTRL 2

In Sampler mode : Select the previous/next available Sampler Trigger mode (On/Off, Hold, Stutter & Un-mute)

In Single Effects mode : Adjust the 2nd Parameter of the selected Effect on Left Deck.
In Multi Effects mode : Adjust the 1st Parameter of the selected FX2 Effect Slot on Left Deck.

In Pads mode :Adjust the 1st Parameter of the selected page for the VirtualDJ Pads on the Left Deck.

In Sampler mode : Same functionality as without SHIFT pressed

In Single Effects mode : Adjust the 4th Parameter of the selected Effect on Left Deck.
In Multi Effects mode : Adjust the 2nd Parameter of the selected FX2 Effect Slot on Left Deck.

In Pads mode :Adjust the 2nd Parameter (if available) of the selected page for the VirtualDJ Pads on the Left Deck.

14 CTRL 3

In Sampler mode : No action assigned

In Effects mode : Adjust the 1st Parameter of the selected Effect on Right Deck.

In Pads mode :Select the previous/next available page for the VirtualDJ Pads on the Right Deck.

In Sampler mode : No functionality

In Single Effects mode : Adjust the 3rd Parameter of the selected Effect on Right Deck.
In Multi Effects mode : Adjust the 2nd Parameter of the selected FX1 Effect Slot on Right Deck.

In Pads mode :Same functionality as without SHIFT pressed.

15 CTRL 4

In Sampler mode : Adjust the Master Volume of the Sampler

In Single Effects mode : Adjust the 2nd Parameter of the selected Effect on Right Deck.
In Multi Effects mode : Adjust the 1st Parameter of the selected FX2 Effect Slot on Right Deck.

In Pads mode :Adjust the 1st Parameter of the selected page for the VirtualDJ Pads on the Right Deck.

In Sampler mode : Same functionality as without SHIFT pressed

In Single Effects mode : Adjust the 4th Parameter of the selected Effect on Right Deck.
In Multi Effects mode : Adjust the 2nd Parameter of the selected FX2 Effect Slot on Right Deck.

In Pads mode :Adjust the 2nd Parameter (if available) of the selected page for the VirtualDJ Pads on the Right Deck.

NOTES

* The 4 TIME DIV buttons 1/4 (SHIFT), 1/8, 1/16, 1/32 and the 4 FADERS, offer the same functionality regardless the selected CTRL BANK (A,B,C). However, these keys offer different MIDI value and are named differently in the default Mapping , so those can be assigned with different actions depending on the selected CTRL BANK.

** The PROGRAM select knob and the PAD BANK and CTRL BANK buttons are hardware controls, they do not send any MIDI message, so cannot be assigned to a VirtualDJ action.