Hardware Manuals


American Audio - 10MXR  

Record & TIMECODES


Recording & Broadcasting


The American Audio 10MXR does not offer the ability to Record or broadcast your mixing internally. However, recording & broadcasting (including the Microphone inputs) is possible by following the way described below.

  • Connect the Booth Output with either Inputs CH1 or CH2, using a proper 2XRCA cable.

  • Head to the AUDIO tab of VirtualDJ Settings and add a Record line to the audio configuration and select the Inputs Channels 1&2 or 3&4 (depending on which Input CH the Booth Output is routed).





Timecodes


The American Audio 10MXR offers the ability to use Timecode CDs or Vinyls (DVS).

  • Connect your Timecode CD players or turntables with the Inputs of CH 1 and CH2 using proper 2xRCA cables.

  • Head to the AUDIO tab of VirtualDJ Settings, and click on the Timecode button in the Input tab.
    The following audio configuration will be created and the Timecode on/off buttons will appear on the VirtualDJ GUI.

  • Click APPLY.










Hardware Integration Department
2016 - ATOMIX PRODUCTIONS



Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.