Behringer - CMD Studio 2a
ACTION1 CUEWhen track is paused, Sets a Temporary Cue point and previews the track while pressed. Jumps to the assigned Cue point when track is playing2 PLAYPlay-pause Left/Right Deck3 JOGTouch-sensitive jogwheel for Scratch or Bend, depending on the Vinyl/CD mode
When the MODE button is pressed, jowheels are set to Search (Seek) mode for fast searching track in time4 SYNCMatches Tempo and Phase of the Left/Right Deck with the values of the opposite Deck5 PITCH BENDIn Tempo mode : Temporary slow-down/speed-up track. Tempo will resume to the value designated by the Pitch fader when the button is released
In Loop mode :
MINUS : Sets a Loop In (Start) point for a manual loop
PLUS : Sets a Loop Out (End) point for a manual loop. Exits Loop when enabled
In Effect mode :
MINUS : Selects the next available Effect
PLUS. Activates the selected Effect 6 PITCHIn Tempo mode : Adjust the tempo (BPM) of the track
In Loop mode : Doubles/halves the size of the Loop. when the MODE button is pressed, moves the triggered loop backwards/forward by 1 beat.
In Effects mode : Adjusts the 1st Parameter of the selected Effect. When the MODE button is pressed, adjust the 2nd Parameter of the selected Effect7 ASSIGN A/BASSIGN A : Sets PITCH BEND and PITCH keys to Loop mode when enabled
ASSIGN B : Sets PITCH BEND and PITCH keys to Effects mode when enabled.
When both are disabled, the PITCH BEND and PITCH keys are set to Tempo mode (default mode)8 HOTCUES 1-4Assign a Hotcue 1 to 4 or jumps to the Hotcue (if assigned) to the Left/Right deck. When MODE button is pressed, the buttons delete the assigned Hotcue9 SAMPLES 1-4Trigger a Sample 1 to 4 from the selected Sampler Bank. If the Bank has less than 5 samples, both sides of the unit will trigger the same samples. When the Bank has more than 4 samples, left side will trigger samples 1 to 4 and right side will trigger samples 5 to 8
When MODE button is pressed, the buttons stop the triggered Sample10CROSSFADERBlends audio signals from the Left and Right Decks.
When the fader is at the far left position, only Left Deck will be sent to the Master Output.
When the fader is at the far right position, only Right Deck will be sent to the Master Output. 11VOLUMEAdjusts the Output Volume of the Left/Right Deck12 CUE/PFLSends Left/Right deck's audio signal to the Headphones Channel for pre-listening13 LOWAdjust the Low (Bass) Equalizer Band14 MIDAdjust the Middle Equalizer Band15 HIGHAdjust the High (Treble) Equalizer Band16CUE LEVELAdjusts the Volume of the Headphones Output Channel17VINYL Sets both Jogwheels to Vinyl ( Scratch ) mode when enabled and to Bend (CD) mode when disabled18MODEHold this button to access secondary functions for the keys as described in this guide19UPSelects the previous folder/file from the Browser20FOLDERS Sets focus to the Folders list of Browser. If focus is on the Folders list, opens/closes sub-folders.
When MODE button is pressed, selects the new view of the Sideview21FILES Sets focus to the Songs list of the Browser.
When the MODE button is pressed, Sets focus to the Sideview of the Browser22DOWNSelects the next folder/file from the Browser23LOADLoads the selected track from the Browser to the Left/Right Deck
When the MODE button is pressed, unloads the same DeckNote :
The unit offers the ability to select a different MIDI Channel and in order to ensure proper functionality, VirtualDJ forces MIDI Channel 4 for this unit on initialization. If you find that some other application doesn't work properly after VirtualDJ is used, follow this procedure to reset the unit to its primary MIDI Channel.
- While holding left CUE and left PLAY buttons simultaneously, plug the USB cable to the unit,
- When these buttons blink (after a couple of seconds), release the CUE and PLAY buttons.
For further Technical features and specifications, visit Behringer CMD Studio 2a
Hardware Integration Department 2016 - ATOMIX PRODUCTIONS Reproduction of this manual in full or in part without written permission from Atomix Productions is prohibited.