Hardware Manuals


Rane - Seventy-Two - Disposición  

Efectos





Rane Seventy-Two offers you the ability to combine Hardware Effects (Flex FX) with Software Effects at the same time.

You can activate up to four Effects at once per deck. Three of them are software (provided by VirtualDJ) and one of them is hardware (provided by Rane Seventy-Two firmware).

For this reason the screen of Rane Seventy-Two offers four effect slots per deck numbered as 20, 21, 22 and 23 on the picture above.

The way effects work with Rane Seventy-Two differs from the way effects work with most other controllers.
You must "arm" an effect first before you are able to activate / apply it on a deck.
For this, you must use the buttons marked as 16, 17, 18 and 19 to arm the effects you wish to use, and then activate them by using the EFFECTS lever (marked as 27)

When you use the EFFECT lever, all armed effects are activated at once (chained effects).

KEY

ACTION

14 FX ASSIGN
Assigns which side of the screen contol which deck effects on VirtualDJ.
Due to firmware limitations, for the effects to operate properly with VirtualDJ, left side of the screen must be assigned on deck 1 and right side on deck 2.
15 FX PARAMETER
Adjusts the strength of the selected effect, or selects a different effect for the selected slot:
  • Click on one of the FX slots (20, 21, 22 or 23).
    A white arrow will show up on the slot's box. This indicates that the slot is selected.
  • Turn the PARAMETER knob clockwise to increase the strength of the effect. Turn the PARAMETER knob counter clockwise to decrease the strength of the effect.
  • Push the PARAMETER knob down.
    The FX ARM button of the selected slot should start blinking.
  • Turn the PARAMETER knob to select a new effect for the slot.
  • Push the PARAMTER knob once more. The selection has been completed and the slot will stop blinking.
16 ARM FX1
Press this button to prepare / arm the effect on slot 1 to be applied when EFFECTS lever is pulled.
When the slot is armed the led of the button will turn on with full brightness.
17 ARM FX2
Press this button to prepare / arm the effect on slot 2 to be applied when EFFECTS lever is pulled.
When the slot is armed the led of the button will turn on with full brightness.
18 ARM FX3
Press this button to prepare / arm the effect on slot 3 to be applied when EFFECTS lever is pulled.
When the slot is armed the led of the button will turn on with full brightness.
19 ARM FLEX FX
Press this button to prepare / arm the effect on slot 4 to be applied when EFFECTS lever is pulled.
When the slot is armed the led of the button will turn on with full brightness.
20 FX SLOT 1
Shows the name and strength of the effect selected on slot 1.
Click the box with your finger to select slot 1 as the "working" slot for the PARAMETERS knob (a white arrow will appear on top side of the box)
21 FX SLOT 2
Shows the name and strength of the effect selected on slot 2.
Click the box with your finger to select slot 2 as the "working" slot for the PARAMETERS knob (a white arrow will appear on top side of the box)
22 FX SLOT 3
Shows the name and strength of the effect selected on slot 3.
Click the box with your finger to select slot 3 as the "working" slot for the PARAMETERS knob (a white arrow will appear on top side of the box)
23 FLEX FX SLOT
Shows the name and strength of the effect selected on slot 4.
Click the box with your finger to select slot 4 as the "working" slot for the PARAMETERS knob (a white arrow will appear on top side of the box)
Please note that the effects on this slot are provided by Rane Seventy-Two firmware (hardware effects)
24 FX BEATS
Shows length/timing in beats for the software (orange) and hardware (blue) effects.
Click on one value and use the PARAMETERS knob to adjust it.
Please note that effect beats timing is not available for all software effects
25 DEPTH
Adjusts the strength of the applied Hardware effect (Flex FX)
26 TOUCH FX
Enables Touch FX functionality in Rane Seventy-Two where the effects of the four slots are also combined with a low/high pass filter in a two dimensional parameters screen.
Touch the screen at any place inside the parameters box to apply momentarily (while pressed) the selected effects. Once you lift your finger, the effects will stop from being applied.
27 EFFECTS LEVER
Activates the currently armed effects momentarily (while held) on down position or permanently on upper position.
You can reverse these levers so that upper position is momentarily and down position is permanent if you wish. For further details please advise the unit's user guide.


Important notice:

By default the effects on Rane Seventy-Two are applied as post-fader effects. This means that they are applied after the volume fader setting. This mode allows effects trailing to be heard even after turning channels volume to zero. However for this reason you won't be able to pre-listen the effects on your headphones. If you wish to change this behavior you can change the fxProsessing setting in VirtualDJ options and set it to pre-fader.
Pantalla