S SHIFTPress this button down to access secondary actions as described in the SHIFT ACTION column
KEY
ACTION
SHIFT (SECONDARY) ACTION
20 PLAYPlay/Pause the track loaded to left/right deckPlay-stutter track. When pressed, track will resume playing from the previously stopped position21 CUE Sets current position as Temporary Cue point. Preview track when paused while button is pressed Jumps and stops to the Cue point when playingReturns to the beginning of the track22 SYNCMatch BPM and Beat Phase with the opposite deckSmooth pitch reset. When pressed track will gradually get its original tempo23 PAD MODESSet the 8 Pads to one of the available 4 primary modes. Mode 1 : Hotcues Mode 2 : Loop Roll Mode 3 : Stems +FX Mode 4 : Sampler Set the 8 Pads to one of the 4 secondary modes. Mode 5 : Keycue Mode 6 : Loop Mode 7 : Saved Loop Mode 8 : Scratch Bank24 Pads These performance Pads offer different functionality depending on the selected Pads mode These buttons offer different functionality depending on the selected Pads mode25 PARAMThese buttons control the 1st Parameter of the selected Pads pageThese buttons control the 2nd Parameter (if available) of the selected Pads page26 INSTRUMPress to keep the Instrumental Stem and mute Vocals Stem of the loaded TrackEnable/disable Slip mode. When enabled (its led is turned on) several functions, such as scratching, Loops and hotcues will be performed temporary and when finished (released), the track will resume from the position it would have been if the action was never triggered27 VOCALPress to keep the Vocals Stem and mute the Instrumental Stem of the loaded Track28 LOOP INWhen not in loop, press to set current position as the beginning of a manual loop. Press and hold this button for more than 1 second to turn a 4 beats auto-loop on/off.Half the size in beats of the Auto-loop.29 LOOP OUTWhen not in loop, press to set current position as the end of a manual loop. When in loop, press to exit the loop.Double the size in beats of the Auto-loop30 LOOPTurn to half/double the size of the loop. Push to turn the loop on/off.If in Loop, turn to move the loop backwards/forward in time by the amount of the selected beats of the loop. When not in loop skip the Track by the same amount backwards/forward31 TEMPO LEDThe LED indicates if the Track's tempo matches the value of the opposite Deck and will be offered if the BeatMatch Guide button [5] is turned on. 32 BEAT ALIGNThese leds indicate the direction the jogwheel needs to be moved to, in order its beat-grid to match with the opposite deck. Leds will operate if: - the BeatMatch Guide button [5] is turned on - the Deck is not the Master -Deck (deck that is playing out live - on air) - the deck is not playing33 TEMPOAdjust the tempo of the loaded track When in middle position (white led is turned on), the track plays at its original speed. When the BeatMatch Guide button [5] is enabled, the red LEDs indicate the direction the Tempo fader needs to be moved in order the track to get the same BPM as the one of the opposite Deck.34 JOGWHEELMotorized jogwheel for scratching or bending.Fast seek (search) track forward/backwards35 RANGESelects the next available %range for the Pitch faderEnable/disable Key-Lock36 BACK Toggles the focus of the Browser between the Folders and the Songs list.Selects the next available tab of the Sideview list of Browser 37 ASSIST/PREPAdds the selected Track(s) from the Songs list to the Automix list Sets the focus of the Browser to the Sideview list38 BROWSEBrowse through Tracks or Folders depending on the currently focused list of Browser. Push to load the selected Track to the Left/Right Deck Scrolls fast (+10/-10 per step) through Folders or Tracks